Contec DIO-1616B-LPE User Manual Download Page 13

Page: 13 / 57

1. Before Using the Product

DIO-1616B-LPE

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting

in injury or death and the destruction of equipment and resources. Understand the meanings of these
labels to operate the equipment safely.

DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.

DANGER

WARNING

CAUTION

Summary of Contents for DIO-1616B-LPE


























































Search results

Summary of Contents for DIO-1616B-LPE

Reviews:

Related manuals for DIO-1616B-LPE

Brands by name

Popular brands

Contec DIO-1616B-LPE, User Manual

Search results

Summary of Contents for DIO-1616B-LPE

Reviews:

Related manuals for DIO-1616B-LPE

Brands by name

Popular brands