6. About Hardware
DIO-3232T-PE, DI-64T-PE, DO-64T-PE
61
DI-64T-PE
Table 6.2. Specification < DI-64T-PE >
Item Specification
Input
Input format
Unisolated TTL level input (Negative logic *1)
Number of input signal
channels
64channels (32channels of them are available for interrupts)
(1 common)
Input resistance
Pull up 10k
Ω
(1TTL load)
Interrupt
32 interrupt input signals are arranged into a single output of interrupt
signal INTA.
An interrupt is generated at the rising edge
(HIGH-to-LOW transition) or falling edge (LOW-to-HIGH transition).
Response time
200nsec within
Common
External supply capable
current (Max.)
5VDC 350mA
Allowable distance of signal
extension
Approx. 1.5m (depending on wiring environment)
I/O address
Any 32-byte boundary
Interrupt Level
1 level use
Max. board count for
connection
16 boards including the master board
Power consumption (Max.)
3.3VDC 400mA
Operating condition
0 - 50°C, 10 - 90%RH (No condensation)
Bus specification
PCI Express Base Specification Rev. 1.0a x1
Dimension (mm)
121.69(L) x 110.18(H)
Connector
96 pin half pitch connector [F (female) type]
PCR- [HONDA TSUSHIN KOGYO CO., LTD.] equivalent to it
Weight
100g
*1 Data “0” and “1” correspond to the High and Low levels, respectively.
Board Dimensions
[mm]
121.69(L)
11
0.
18
(H
)
The standard outside dimension (L) is
the distance from the end of the board to
the outer surface of the slot cover.
