Contec DAI12-4(USB)GY, User Manual

Page: 19 / 73

3. Setup
14
DAI12-4(USB)GY
Setting a Module ID
The host computer distinguishes and keeps track of the modules of
same model by assigning Module IDs to them. Factory settings “00”
can be used when only one module per model is connected to one
computer.
Each module should be assigned a unique Module ID in the range of
00 - 7Fh when several modules with the same model are being
connected.
There are two rotary switches, moreover, “x16” and “x1” represent
high bits and low bits of Module ID respectively.
Figure 3.2. Setting a Module ID
Module
ID(x16)
Module
ID (x1)
[0]
[0]
Module
ID(x16)
Module
ID (x1)
[1]
[2] 0
1
2
34
56
7
9
A
C E
F
8
0
1
2
34
56
7
9
A
C E
F
8
0
1
2
34
56
7
9
A
C E
F
8
0
1
2
34
56
7
9
A
C E
F
8
Module ID 00h
[Factory Settings]
Module ID 12h