—
Product Nomenclature and Function
—
CPS-MC341-A1-111 Reference Manual (Hardware)
—
21
—
1.
Nomenclature of Product Components
Component names of the product are shown in the figure below.
No.
Name
Function
1 Power Connector
This is a connector for power. Use the 3-pin connector included in
the package.
2 Debug Connector
Do not use this.
3 SD Card Slot
This a slot for inserting SD card to store data.
4 LED Indicator
This indicates status of the product.
5 Reset Switch
This resets the product.
6 Shut-Down Switch
This shuts down the product.
7 DIP Switch
This is used for system setup.
8 LAN Port
This is a connector for LAN.
9 Analog Input
This is a connector for analog input.
(Use the 10-pin connector included in the package)
10 Analog Output
This is a connector for analog output.
(Use the 10-pin connector included in the package)
1
2
3
R
ESE
T
SW
1
SH
UT
DO
W
N
LAN B
LAN A
12-24VDC
4
AI
AO
SD
