2. Setup
10
COM-1PDH-LPE
Step 1 Setting the Hardware
This section describes how to set the board and plug it on your PC.
The board has some switches and jumper to be preset.
Check the on-board switches and jumpers before plugging the board into an expansion slot.
The board can be set up even with the factory defaults untouched. You can change board settings later.
Replacing the Bracket
This board is shipped with a Low Profile size bracket mounted. To plug the board into a standard size
slot, replace the bracket with the bundled standard size bracket. The replacing method is as follows:
Figure 2.1. Replacing the Bracket
Standard size bracket
Low Profile size bracket
- Remove the screws and replace with the standard size bracket.
Use a Phillips screwdriver to screw or unscrew.
R
xD
T
x
D
SG
R
xD
T
x
D
-
+
-
+
Summary of Contents for COM-1PDH-LPE
Page 31: ...2 Setup 26 COM 1PDH LPE...
Page 37: ...4 Functions 32 COM 1PDH LPE...