4. Functions
CNT32-4MT(LPCI)
63
Sampling output signal
The start, stop, or clock signals used to control sampling on the CNT32-4MT(LPCI) can be output from
the interface connector.
Sampling start output signal
This outputs the sampling start trigger as a one-shot pulse signal (100nsec) with negative logic polarity.
The logic polarity and pulse width cannot be modified.
Sampling stop output signal
This outputs the sampling stop trigger as a one-shot pulse signal (100nsec) with negative logic polarity.
The logic polarity and pulse width cannot be modified.
Sampling clock output signal
This outputs the sampling clock trigger as a one-shot pulse signal (100nsec) with negative logic polarity.
The logic polarity and pulse width cannot be modified.
