Ver.1.01
CNT-3204IN-USB
2
Function Specifications <2/2>
Item
Specification
Output *1
Control
Control output signal type
Optocoupler isolated open collector output
Control output channel
1 x 4 channels
Control output signal
- Count match 0 output(one-shot pulse output)
- Count match 1 output(one-shot pulse output)
- Digital filter error output(one-shot pulse output)
- Abnormal input error output(one-shot pulse output)
- General-purpose output(Level output)
Software-selected from among the above five options
(Positive/negative logic is selected with the software.)
One shot output signal
amplitude
Selected between 10µsec, 100µsec, 1msec, 10msec and 100 msec
(Can be set for each channel, within pre 1µsec)
Response time
5µsec (Max.)
Output rating
35VDC, 50mA(MAX)
External Power
5V - 12VDC±10%
USB
Bus specification
USB Specification 2.0/1.1-compliant
USB transfer rate *2
12Mbps (Full-speed), 480Mbps (High-speed)
USB connector
USB mini B connector
Power supply
Self-power
Power supply
Input voltage range
12 - 24VDC±10%
Current consumption (Max.)
12VDC 200mA, 24VDC 90mA
Power supply connector
European type terminal 3.5mm pitch 3-pin jack connector
Common section
Interface connector
Counter and Control : European type terminal 3.5mm pitch
8-pin jack connector x4
Sampling :
European type terminal 3.5mm pitch
4-pin jack connector x1
Dielectric strength
1000VAC
Physical dimensions (mm)
188.0(W)×78.0(D)×30.5(H) (No projection included)
Weight
250g (Not including the USB cable, attachment, connector)
The length of cable (supplied)
USB cable(Type A - mini-B type) 1.8m
*1 Use the shielded cable for this product to meet “CE EMC Directive”.
*2 The USB transfer speed depends on the host PC environment used (OS and USB host controller).
Installation Environment Requirements
Item
Specification
Operating ambient temperature
-20 - +60°C *1
Operating ambient humidity
10 - 90%RH (No condensation)
Floating dust particles
Not to be excessive
Corrosive gases
None
Line-noise
resistance *2
Line noise
AC Line/±2kV
Signal Line /±1kV(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
electricity
resistance
Touch /±4kV(IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Air /±8kV(IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
resistance
Sweep
resistance
10 - 57Hz /semi-amplitude vibration 0.15mm, 57 - 150Hz/2.0G
40minutes each in X, Y, and Z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
Shock resistance
147m/s
2
(15G)/11ms/half-sine shock
(JIS C 60068-2-27 -compliant, IEC 60068-2-27 -compliant)
Standard
VCCI Class A, FCC Class A,
CE Marking (EMC Directive Class A, RoHS Directive)
*1 When using the supplied AC adaptor POA 201-10-2, it is 0 - 40°C.
*2 When using the supplied AC adaptor POA 201-10-2.
AC adapter environmental condition (environmental specification)
Item
Specifications
Input voltage range
90 - 264VAC
Rated input current
300mA
Number of frequency
50 - 60Hz
Rated output voltage
12.0VDC
Rated output current
1.0A (Max.)
Physical dimensions (mm)
47.5(W)x75(D)x27.3(H) (No protrusions)
Weight
175g
Operating temperature
0 - 40ºC
Operating humidity
20 - 80%RH (No condensation)
Life expectancy *1
1.5 years (at the ambient temperature 40 ºC when 100VAC is
input and 1.0A is output)
4 years (at the ambient temperature 40 ºC when 100VAC is
input and 0.5A is output)
Allowable time of short interruption
20ms (Max.) (When 100VAC is input and 0.55A is output) *2
Floating dust particles
Not to be excessive
Corrosive gases
None
Voltage compatible to the supplied AC cable
125VAC 7A
*1 Life expectancy is four years when using this product.
*2 When short interruption occurs and
Physical Dimensions
Product
Physical dimensions of the supplied AC adapter (POA201-10-2)
Packing List
Product…1
Interface Connector(8-pin)…4
Setup Guide…1
Interface Connector(4-pin)…1
Warranty Certificate…1
Rubber feet…4
Serial Number Label…1
AC Adapter…1
USB Cable (1.8m)…1
AC Cable…1
USB Cable Attachment on the main unit’s side)…1
PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de
