CheckMate
TM
III
RT-U43C 9
CheckMate
TM
III
RT-U43C 10
CheckMate
TM
III
RT-U43C 11
12. Using Your RT-U43C Remote Control
Your remote has two (2) Smartkeys
TM
[CBL] and [TV].
Each Smartkey
TM
can be programmed so whenever
it
’
s pressed, it can transmit up to 12 individual button
presses in sequence.
Programming and using the [CBL] Smartkey
TM
The [CBL] button normally turns on / off your cable
set-top terminal. You can also program this
Smartkey™ so whenever it is pressed, it will turn on
your cable set-top terminal and TV, then tune the TV
to a specific channel with one button press.
1. Press [CBL], then [SETTINGS] together - hold both
down together until the indicator light illuminates.
2. In this order, press [CBL], [TV], [0], [3].
The indicator light will blink and remain illuminated.
3. Press [CH
▲
] to lock in this setting. The indicator
light will blink and go out.
To return the [CBL] button to its normal default setting,
repeat step 1, then press [CH
▼
].
Programming and using the [TV] Smartkey
TM
The [TV] button normally turns on / off your TV.
You can also program this Smartkey
TM
so whenever it
is pressed, it will turn on your TV, then tune your TV to
channel 3 with one button press.
1. Press [TV], then [SETTINGS] together - hold both
down together until the indicator light illuminates.
2. In this order, press [TV], [0], [3]. The indicator light will
blink and remain illuminated.
3. Press [CH
▲
] to lock in this setting. The indicator
light will blink and go out.
To return the [TV] button to its normal default setting,
repeat step 1, then press [CH
▼
].
Note : When using any Smartkey
TM
to transmit a
series of button presses, be sure to keep your remote
aimed at the devices to ensure all functions are
received in their entirety.
9. Resetting Your Remote Control
To reset your remote control to its factory default
settings...
1. Press [CBL], then [SELECT]- hold both down
until the indicator light illuminates.
2. Press [SETTINGS], then [SETTINGS] again.
The indicator light will blink and go out.
10. Helpful Tips and Troubleshooting
1. Your remote is equipped with a Point and Press
TM
Programming label on the back of its case. This will
help you quickly program the remote without using
codes.
2. The indicator light will remain on while the remote is
in a programming mode. In the absence of an
entry, the light will go out after 45 seconds.
When locking in your devices, the indicator light will
blink and go out.
3. When using the Point and Press
TM
programming
method, you may find a code that turns your device
off but not back on. If this happens...
a. the correct code has not been found.
Continue pressing [CH
▲
] until your devices
turn on and off.
OR
b. you may have gone past the correct matching
code. Try pressing [CH
▼
] one step at a time
until you find a code that turns your cable set-top
terminal back on.
4. If you have any questions concerning the operation
of your cable set-top terminal, contact your cable
operator.
5. If the same button is pressed and held for 45
seconds, your remote control will turn itself off.
This extends the battery life by should the remote
become lodged under or between heavy objects,
for example sofa cushions.
REV. 7/2001
© 2001, CONTEC CORPORATION
8. Code Number Readback
To identify the 3-digit TV setup code stored under the
Point and Press
TM
method...
1. Press [TV], then [SELECT] - hold both down until
the indicator light illuminates.
2. Press [INFO] to identify your TV setup code. The
indicator light will “blink back” the code numbers,
with a 1-second interval between each digit of the
code.
Example : For code “035”, the indicator light will blink
10 times, then 3 times, then 5 times.
To identify the 3-digit Cable setup code, press [CBL],
then [SELECT] in step 1 above, then press [INFO].
To identify the 3-digit VCR setup code, press [VCR],
then [SELECT] in step 1 above, then press [INFO].
CheckMate
TM
III
RT-U43C 8
DVD Setup Codes
Memorex
002 005 025 030 034 104 106 110
Mitsubishi
023 029 031 047 106
MTC
025 028 106
Montgomery Ward 014 025 027 034 037 062
Multi Tech
025 028 042 106
NEC
004 005 007 044 070 071
Orion
022 049 065 066 067 068
Panasonic
008 013 034 099
Pentax 046
Philco
008 034 036 106
Philips
008 017 034 036 106
Pioneer
004 045 046
Portland 058
ProScan 027
041
Quasar 013
034
Quartz 005
009
RCA
001 008 016 017 027 028 037 041
046 106
Realistic
005 014 025 030 034 106
Samsung
021 028 039 098 108 111
Sansai 042
Sansui
004 093
Sanyo
005 024 114
Sayyo
030
Scott
003 006 031 042
Sears
002 005 015 030 046
Sharp
014 056
Shintom 042
Signature 2000 014 025 027 037 062
Sony
032 035 050
Soundesign
106
Sylvania
008 016 017 025 034 036 047 054
065 073 074 106
Symphonic 025
106
Tandy
005 025 106
Tashiko
002
Tatung 007
Teac
007 025 106
Technics 008
Teknika
002 053 106
Thomas
106
TMK
091
Toshiba
006 015 046 052 096
Totevision 002
028
Unitech 028
Vector Research 031 044
Video Concepts 044 106
Wards
002 014 025 028 060 106
XR-1000 042
Yamaha
005 007 044 106
Zenith
004 018 035 038 061 106
When you first program your remote, volume and
mute are controlled through your TV.
To control volume / mute through your cable set-
top terminal...
1. Press [CBL], then [SELECT] together - hold both
down until the indicator light illuminates.
2. Press [VOL
▲
], then [CBL] for cable volume. The
indicator light will blink and go out.
To return volume control back to your TV, repeat step
1 above, then press [VOL
▲
], then [TV] in step 2.
6. Programming Volume Control
Denon 076
GE 077
078
Hitachi
117
JVC 079
KLH
118
LG 079
Magnavox 081
082
Mitsubishi 083
Panasonic 084
Pioneer 085
Samsung 086
Sharp
119
Sony 087
Thomson
120
Toshiba 088
Yamaha 089
Zenith 089
7. Your Remote’s Smartkeys
TM
