Ver.1.04
V
AO-1616L-LPE
2
Item
Specification
Analog output
Isolated specification
Unisolated
Number of output
channels
16ch
Output range
Bipolar
±
10V
Absolute max. output
currency
±
3mA
Output impedance
1
Ω
or less
Resolution
16bit
Non-Linearity error *1
±
5LSB
Conversion speed
10
µ
sec
Buffer memory
1k Word
Conversion start trigger
Software / external trigger
Conversion stop trigger
Number of sampling times / external trigger/software
External start signal
LVTTL-level (Rising or falling edge can be selected by
software)
Digital filter (1
µ
sec can be selected by software)
External stop signal
LVTTL-level (Rising or falling edge can be selected by
software)
Digital filter (1
µ
sec can be selected by software)
External clock signal
LVTTL-level (Rising or falling edge can be selected by
software)
Digital I/O
Number of input channels
Unisolated input 4ch (LVTTL-level positive logic)
Number of output channels Unisolated output 4ch (LVTTL-level positive logic)
Counter
Number of channels
1ch
Counting system
Up count
Max. count
FFFFFFFFh (Binary data,32bit)
Number of external inputs
2 LVTTL-level (Gate/Up)/ch
Gate (High level), Up (Rising edge)
Number of external outputs LVTTL-level Count match output (positive logic, pulse output)
Response frequency
10MHz (Max.)
Common section
I/O address
64 ports
Interruption level
Errors and various factors, One interrupt request line as INTA
Connector
10250-52A2JL[3M]
Power consumption (Max.)
3.3VDC 310mA 12VDC 430mA
Operating condition
0 - 50
°
C, 10 - 90%RH (No condensation)
Bus specification
PCI Express Base Specification Rev. 1.0a x1
Dimension (mm)
121.69 (L) x 67.90 (H)
Weight
70g
Certification
RoHS,VCCI
*1 The non-linearity error means an error of approximately 0.1% occurs over the maximum
range at 0
°
C and 50
°
C ambient temperature.
Board Dimensions
Windows version of analog I/O driver API-AIO(WDM)
[Stored on the bundled Disk driver library API-PAC(W32)]
The API-AIO(WDM) is the Windows version driver library
software that provides products in the form of Win32 API
functions (DLL). Various sample programs such as Visual
Basic and Visual C++, etc and diagnostic program *1useful for
checking operation is provided.
For more details on the supported OS, applicable language and
new information, please visit the CONTEC’s Web site.
Linux version of analog I/O driver API-AIO(LNX)
[Stored on the bundled Disk driver library API-PAC(W32)]
The API-AIO(LNX) is the Linux version driver software which
provides device drivers (modules) by shared library and kernel
version. Various sample programs of gcc are provided.
For more details on the supported OS, applicable language and
new information, please visit the CONTEC’s Web site.
Data Acquisition library for MATLAB ML-DAQ
(Available for downloading (free of charge) from the
CONTEC web site.)
This is the library software which allows you to use our analog
I/O device products on MATLAB by The MathWorks. Each
function is offered in accordance with the interface which is
integrated in MATLAB’s Data Acquisition Toolbox.
For more details on the supported OS, applicable language and
new information, please visit the CONTEC’s Web site.
Data acquisition VI library for LabVIEW VI-DAQ
(Available for downloading (free of charge) from the
CONTEC web site.)
This is a VI library to use in National Instruments LabVIEW.
VI-DAQ is created with a function form similar to that of
LabVIEW's Data Acquisition VI, allowing you to use various
devices without complicated settings.
For more details on the library and download of VI-DAQ, please
visit the CONTEC’s Web site.
Cable(Option)
Shield Cable with 50-Pin Mini-Ribbon Connectors at either Ends
: PCB50PS-0.5P (0.5m)
: PCB50PS-1.5P (1.5m)
Shield Cable with 50-Pin Mini-Ribbon Connector at one End
: PCA50PS-0.5P (0.5m)
: PCA50PS-1.5P (1.5m)
Accessories (Option)
Screw Terminal Unit (M3 x 50P)
: EPD-50A *1*2
*1 PCB50PS-0.5P or PCB50PS-1.5P optional cable is required separately.
*2 “Spring-up” type terminal is used to prevent terminal screws from falling off.
*
Check the CONTEC’s Web site for more information on these options.
Board [AO-1616L-LPE] …1
First step guide … 1
Disk *1 [API-PAC(W32)] …1
Standard-sized bracket…1
Warranty Certificate…1
Serial software and User’s Guide…1
Serial number label…1
*1 Driver software and User’s Guide.
[mm]
121.69(L)
6
7
.9
0
(H)
The standard outside
dimension(L) is the distance
from the end of the board
to the outer surface of
the slot cover.
Specification
Packing List
Cable & Connector
Accessories
Support Software
PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de
