8
7.
Place the speaker pod on the customer side of the counter top, ensuring it
does not cause an obstruction.
8. Speaker pods and staff pods can be either free standing or fixed. Move to
step 14 if you do not wish to fix the pods to the counter.
9. Use cable management holes in the counter to run the staff pod and
speaker pod cables to the amplifier. If there are not already cable
management holes, drill suitable locations near the rear of both the staff
and customer sides of the counter.
10. Remove the top of the pods to gain access to the fixing points.
11. Mark the two fixing points on the bottom of both pods. Then mark two
cable holes to be drilled, one for both the customer/visitor side and the
staff side.
12. Ensure there will be access to retrieve the cables then drill the holes.
13. Fix the pods to their respective counters.
14. Feed the pods’ wires through the cable management holes.
15. Route all cabling neatly to the amplifier location on the staff side.
Summary of Contents for STS-K072
Page 15: ......
