8
Fixing
points
Cable
management
hole
6.
Mark the x4 fixing point holes and cable management hole on the
mounting surface.
7. Prepare your mounting surface by installing any wall plugs necessary into
the fixing points marked.
Note
: This kit is provided with x4 universal surface M3 x 24mm wall plugs
which require a 5mm pilot hole. Please ensure appropriate fixings are
used for your intended surface.
Ensure that cables are routed into the cable management hole prior to
securing the back box to the mounting surface.
8.
Use x4 25mm fixing screws to secure the box to its intended surface
using the holes created in the step 7.
Cable
management
hole
Cable
