Contacta STS-K002L-B-01, Installation & User Manual

Page: 8 / 16

8
Amplifier Setup
Our amplifier provides full open duplex communication and is compatible
with all of our speech transfer systems. It features individual displays for staff
or customer adjustments and individual fault lights for easy fault diagnosis.
Vol In
Status
8
7
6
5
4
3
2
1
Vol Out STS-A31
CO
2
contacta
Overview of Front Panel Buttons
Volume In
Increase and decrease
Volume Out
Increase and decrease
Settings
On/Off
Vol In
Status
8
7
6
5
4
3
2
1
Vol Out STS-A31
CO
2
contacta
Vol I
n
Sta
tus
8 7 6 5 4 3 2 1
Vol O
ut
ST
S-A31
CO
2
con
tac
ta
Vol I
n
Sta
tus
8 7 6 5 4 3 2 1
Vol O
ut
ST
S-A31
CO
2
con
tac
ta
Save and exit engineers mode Move to the next setup area
Before entering engineers mode, cycle the power. To do this either:
• Switch the power off at the wall socket and back on again,
or,
• Remove the power connector and re-insert it
To enter engineers mode, simultaneously press and release the following
buttons within 20 seconds of cycling the power:
• Settings button
• Volume In increase button
• Volume Out increase button
The on/off and settings buttons in engineers mode operate as follows:
Please note:
• Save and exit engineers mode after making any adjustments.
• The amplifier will automatically exit engineers mode without saving if no
buttons are pressed for 2 minutes.
Engineer’s Mode