4. Setting up the Plotter EMS-3
LOCATION
A dry, dust-free room is the ideal environment for the plotter. If possible, do not install
the device in damp or very dusty areas. Do not expose the system to direct sunlight.
Please ensure that the connections on the back ride-hand side of the device are
accessible at all times. Position the
EMS-3
firmly on the work surface where it is to be
used, ensuring it is level.
Please ensure that the writing arm can move freely and is not obstructed by other
objects.
CONNECTIONS
Plug the device into a correctly installed mains socket using the power supply included
with the product.
The power supply features a variable AC input voltage of 100-240V AC / 50-60Hz.
The power connection can be replaced by way of adapter plugs.
Plug the connector from the output cable on the power supply into the back right-hand
side of the plotter.
Then hook up the device using the USB cable provided. The respective port is located
on the back right-hand side of the
EMS-3
.
Please note:
Please follow the instructions of installing the device driver
accordingly.
6
