P a g e
|
12
Channel Saving
Recall saved configuration
- From main
menu, use up & down arrows to choose “Channels” menu
then press Enter button
- In the Saved Channels menu, you will find the saved test
configurations you stored "up to 24 test configurations". Use up &
down arrows to choose the required test then press button (2) from
num pad
- You will notice the RF indicator appears on the screen
Save a re-usable Configuration
-
After setting new test configuration parameters, you may save this new configuration by pressing the
hard button “Save”.
-
A box appears on the screen. It has a default name.
To save with its default name, press the “Enter” hard button directly.
To edit the name, press edit button
then enter the name of the test configuration needed to be
saved,
and then press the “Enter” hard button.
Note: The maximum number of the channel name characters is 12
Device Upgrade (WTX-05 only)
WTX-05 is upgradeable by key-code from single-band to multi-band or from CW to WCDMA.
Once purchased an upgrade for your unit, you will be provided with the new code.
Activating a new upgrade with a key-code
From Main menu, choose Setting, and then choose Version/Upgrade.
Yo
u will notice the word “DEACT” beside activated features, while “ACT” beside available upgrades
Toggle between available upgrades, and choose one.
You will be required to write the key-code.
Press Enter. Then you will notice the word “DEACT” instead of “ACT’ beside the new feature.
Memory Status
In this menu you will track the number of used/free channels in the
WTX memory
