Constructor 5411074208400, Original Instructions Manual

Page: 23 / 44

23
Mounting the upper blade guard (10) (fig. D)
§ Slide the guard in horizontal position across the
riving knife.
§ Connect the guard to the riving knife with the wing
nut bolt and the locknut
§ Be aware that the guard is connected under the
lockpin. The lock-pin prevents the guard falling
backwards.
Mounting the adjustable fence
§ Connect the knob (7) with the fence (3) by using
the plate (1 hole with thread); do not
tighten the knob yet.
§ Slide the complete fence with (loosen) knobs onto
the table; the plates on the inner side of
the table.
§ Set the required distance.
§ Tighten the knobs by rotating them (clockwise).
§ Place the water reservoir (4) under the table
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
suffocation!
In this manual and/or on the machine the following
symbols are used:
Warning / Danger!
Read manual before use.
Wear ear protection.
Wear eye protection.
Always wear a dust mask.
Wear gloves
protection
Wear safety shoes
Do not use toothed cutting
discs.
In accordance with
essential applicable safety
standards of European
directives
Class I
Push the tile forward. Don't push to hard and let
the disc do the job.
On the record:
Underwater cutting
Wear ear protection.
Wear eye protection.
Always wear a dust mask.
Wear gloves
protection
Do not use this disc for
cutting metal.
Do not use this disc on a
grinder.
Do not use this disc for
cutting wood.