11
Your new appliance
Press the retractable operating knob to pop it in or out.
Switching the hob on and off
Hob
Your hob comes with its own instructions for use. Read all the
notes on safety before using the hob.
The
¡
symbol indicates which operating knob belongs to
which hotplate (in the example: front left)
1.
To heat up, turn the operating knob clockwise to setting 9.
2.
Once the hotplate has heated up, turn the operating knob to
the desired setting.
3.
To switch off the hotplate, turn the operating knob back to
setting
Û
.
The operating knobs can be adjusted infinitely.
Dual cooking zones
On glass ceramic hobs, you can switch on heating areas for
large cookware.
1.
Turn the operating knob clockwise past setting 9 to setting
ó
.
2.
Once the hotplate has heated up, turn the operating knob to
the desired setting as with normal hotplates.
3.
To switch off the dual-circuit cooking zone, turn the operating
knob back to setting
Û
.
Note:
With autofocus hotplates, the dual cooking zones switch
on automatically. The
ó
setting on the operating knob has no
function.
Cleaning and care
m
Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Risk of damaging the surface. Do not use sharp or abrasive
cleaning agents. Do not use abrasive cleaning aids such as
steel wool or scourers.
Caution!
Do not use steel wool pads as these may scratch off the
lettering.
Wipe down the built-in control box with a soft, damp cloth. In
the case of persistent dirt, add a few drops of a cleaning agent
to the water. Wipe it again afterwards with a dry cloth.
Your hob comes with its own instructions for use. They contain
information on care and cleaning.
Faults and repairs
It is not always necessary to call the after-sales service.
Sometimes, you can find a remedy yourself. Bear in mind the
following information, however:
m
Risk of electric shock!
Work on the appliance electronics may only be performed by
an expert. Disconnect the appliance from the power supply.
Switch off the circuit breaker or take out the fuse in the
household fuse box.
Problem
If the hobs will not turn on:
■
Check whether there has been a power failure.
■
Check the fuse for the appliance in your fuse box.
After-sales service
In the event of faults and repairs that you cannot rectify
yourself, please use our after-sales service.
You can find the addresses in the after-sales service directory.
Note:
You will be charged for calling the after-sales service
regarding an operating error.
For after-sales service cases, please specify the appliance
name: CO260050.
Operating light
Control knobs for hotplates