8. Set 7-day programme
06:00
10
20
08:00
19ºC
4ºC
ºC
12:00
22ºC
14:00
16:00
16ºC
22ºC
10ºC
22:00
PROGRAM 1
PROGRAM 2
PROGRAM
3
PROGRAM
4
PROGRAM 5
PROGRAM 6
An example of one day programme on WMH3E
TIM
E S
ETT
IN
G
PROGR
A
M
M
E SET
TIN
G
- SET MINUTES
- SET DAY
- SET HOURS
- SELECT DAY TO SET
- SET MINUTES FOR PROGRAM
- SELECT PROGRAM TO SET
- SET TEMPERATURE FOR PROGRAM
Logic diagram for setting programme on WMH3E
PROG
MODE
TEMP
1.
Press and hold PROG for 5 seconds to enter the
time setting.
2.
The day will be flashing.
3.
Use TEMP and MODE to navigate day, press
PROG to select day.
4.
PROG 1 will be flashing. Use TEMP and MODE to
navigate programme, use PROG to select
programme.
5.
The minutes will be flashing.
6.
To set minutes, use TEMP and MODE to change
minutes, press PROG to set the minutes.
7.
The hour will be flashing
8.
To set hour, use TEMP and MODE to change
hour, press PROG to set the hour.
9.
The temperature will be flashing.
10. To set temperature, use TEMP and MODE to
change temperature, press PROG to set
temperature.
To add another programme repeat steps 2-10.
The WMH3E has a 7-day timer with up to 6
programming steps available for each day. In the
programming you can set a start time and a
temperature for each programme.
Set programme inactive.
If you do not require the use of all 6 programmes they
can be set as inactive. When in programming mode
select the programme you want to make inactive and
press the TEMP button. If the programme is inactive the
display will show “- -:- -”. To activate the programme
again press the TEMP button.
12. Status light on the heater
STAND-BY No heat output
Reduced heat output
Full power heat output
5
Copy day function.
If you require the same set of programmes throughout
the week it is possible to copy all the programmes
from one day to another.
To do this, when in programming mode press and
hold the TIME button and this will bring you to the
copy day mode. To select which day you wish to
copy press the PROG button and this will cycle
through numbers 1-7 on the screen, this relates to
which day you would like to copy. 1=MON, 2=TUE,
3=WED etc.
To select which day you would like to copy the pro-
grammes to, use the TEMP & MODE to navigate to the
day. Once both are selected, press the time button
to copy the day.
58000387 Iss 02
