D F 2 S L H E A T F L O W : I N S T A L L A T I O N G U I D E
4
Step 11:
Feed the stripped end through the back of the
heater.
(11)
Step 12:
Connect the line and neutral conductors to the
terminal block in the heater marked L & N (This heater is
double insulated and does not require earth).
(12)
(13)
Step 13:
Check connections, un
-
pack cable clamp and
two screws from the screw pack.
(14)
Step 14:
Clamp the cable.
(15)
Step 15:
Place the heater on the two screws using the
key hole slots.
(16)
Step 16:
Fix top screw ensuring not to clamp the mains cable.
Do not over tighten as the screw can pull through the plastic.
