3
Operation
This heater can only be used in conjunction with a CRXSL
or SL Wireless Controller. Each controller can control any
number of heaters providing they are in the RF range.
The heater has an indicator light positioned on the fascia
panel. The light may be:
Green
-
when no heat is needed
Red
-
when the heater is on full power
CSL2SC
CSL2SR
Wall Mounting
The heater must not be located immediately below a
fixed socket outlet.
The Wall Mounting brackets are packed separately in
the carton. Fit the top mounting brackets to the wall at
the height and centres shown in the diagram. With-
draw the two feet-securing screws from the base of the
heater and use these screws to secure the right-angled
bracket to the base of the rear panel of the heater in
the correct holes. These are the holes in the two pro-
truding lugs.
Mount your appliance onto the top brackets via the
two slots in the rear panel. Secure the bottom bracket
to the wall as shown.
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT: ALWAYS RETAIN YOUR USER INSTRUCTIONS
FOR FUTURE REFERENCE
SLPB
SLTI
SLVT
Please refer to the CRXSL or SL user and operating
instructions for full operational details.
Choice of wireless controllers
SLVTB
SLPIR
62001222 Iss 02
CRXSL
