3
Controls
When the appliance is connected to the mains
supply and the wall socket is switched ‘ON’ the
mains neon indicator will light, showing that the
power is available to the unit.
Operation
This heater can only be used in conjunction with
a CRXSL wireless programmable controller. Each
CRXSL can control any number of heaters in the
same room.
CRXSL wireless controller
Please refer to the CRXSL installation and control
guide for full operational details.
Wall mounting
The heater must not be located immediately be-
low a fixed socket outlet.
The Wall Mounting brackets are packed sepa-
rately in the carton.
Fit the mounting brackets to the wall at the
height and centers shown in the diagram below
Withdraw the two feet-securing screws from the
base of the heater and use these screws to se-
cure the right-angled brackets to the base of the
rear panel of the heater in the correct holes.
These are the holes in the two protruding lugs.
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT: ALWAYS RETAIN YOUR USER INSTRUCTIONS FOR FU-
TURE REFERENCE
62001209 Iss 04
Top brackets
