Programming the Adjustable Rapid/Burst Fire Settings
Pg. 7
Each rapid fire mode can be programmed to one of 24 different speed between 3 and 40
shots per second. You can also set the burst fire for each mode from 2 – 10 shots per burst.
Enter the Programming Mode:
To enter the programming mode you must HOLD
“BOTH TRIGGERS”
and
“BOTH
THUMBSTICK CLICKS”
. Continue to hold all four for 6 seconds. You will see the WHITE LED
flash on for 2 seconds then go out.
Exit Programming Mode:
To exit the programming mode just TAP the
“VIEW”
button. The LED will again Flash.
Change Rapid Fire Speed:
To change the rapid fire speed you only need to TAP
“UP”
or
“DOWN
” on the D-pad.
“UP”
to
make the speed faster and
“DOWN
” to make it slower. The WHITE LED will flash when
increasing or decreasing the speed. Once you have reached the MIN or MAX speed the LED
will no longer flash.
Change Burst Fire Quantity:
To change the number of shots fired with the burst fire you must TAP
“LEFT”
or
“RIGHT
” on
the D-pad.
“LEFT”
for fewer shots and
“RIGHT”
for More shots.
Check Rapid Fire Speed Setting:
To check the currently set rapid fire speed you only need to TAP
“Y”
. The WHITE LED will give
a long flash for the “tens” position short flash the single digit. (example. 1 long flash,
followed by 6 short flashes, indicates you are now at speed setting 16) Refer to the table on
the next page for all of the speed settings.
Check Burst Fire Setting:
To check the currently set burst fire setting just TAP
“A”
. The WHITE LED will flash 2-10 times
to indicate the number of shots set for the burst fire.
Reset Current Mode to Default Settings:
To reset the rapid fire mode you are currently editing to the factory default you must HOLD
“X” and “B”
for 7 seconds. After 7 seconds the WHITE LED will flash very fast 10 times to
indicate the Mode has ben reset.
MASTER RESET:
Resets ALL modes, speeds and sub modes to their default settings. HOLD
“BOTH
THUMBSTICK CLICKS”
for 7 seconds. You will see the WHITE LED flash in a pattern of , fast,
slow, fast. After this all settings will be set to default , the programming mode
will be exited and the chip reset.
+
HOLD
+
HOLD
(6 sec)
(7 sec)
+
or
or
+
+
(7 sec)
TAP
TAP
Rapid Fire speed settings table
Rapid Fire Setting
Shots Per Second
Rapid Fire Setting
Shots Per Second
1
40
13
8.33
2
30
14
7.8
3
25
15
7.35
4
20
16
7
5
18
17
6.5
6
16
18
6
7
14
19
5.5
8
12.5
20
5
9
11.35
21
4.5
10
10.4
22
4
11
9.6
23
3.5
12
9
24
3
Important Rapid Fire Speed Information!
The Maxfire ONE rapid fire mod allows you to set rapid fire speeds up to 40 shots
per second, but you must be aware that setting the rapid fire to the maximum will
NOT work for most games. All games have limitations on the rates at which
weapons can fire. Our default mode settings are already optimized to the fastest
possible speeds for the games/weapons listed on page 3.
The possibility to change these settings are available for you to experiment with
and find settings that best compliment your playing style and to be able to create
modes for current and future games which are not part of the default setup.
If you have questions regarding rapid fire or any feature please
contact us at
Pg. 8
+
+
Turn Off All Features
To Quickly turn off all controller features that may be turned on you can HOLD
“BOTH THUMBSTICK CLICKS”
and then TAP either
“UP” or “LEFT”
. The WHITE LED
will quickly flash 10 times and all features will be turned off.
or