Pg. 5
Battlefield 3 Auto Spotting
With auto spotting active the controller will automatically press the “BACK”
button once every second (the max rate allowed by the game). When you
are aiming at an opponent they will be marked with an indicator above their
head for you and your team to see, giving your team a significant advantage.
To activate HOLD “
Back
” and click the “
Right Thumbstick
”
Sub Mode 1 (Default) = On only when Aiming down sights
Sub Mode 2 = On all the time
GOW Perfect Active Reloads
Have perfectly timed active reloads for the most popular weapons in Gears
of War, automatically. When using this mod you select the weapon you are
using by following the process below. Once selected you reload as normal
by pressing “
RB
” and the second press of “
RB
” will be timed perfectly and
automatically. To activate HOLD “
RB
” and tap the “
Mod
” button. While
active the player 3 LED will remain Lit.
Sub Mode 1 (Default) = Gears of War 2
Sub Mode 2 = Gears of War 3
+
+
HOLD
HOLD
Set GOW Active Reload Weapon
To set the weapon you want to perfect active reload you must HOLD the
“
Back
” button and tap “
RB
”. You will tap “
RB
” 1-6 times depending on the
weapon you want to select from the list below. When you release “
Back
”
the player 3 LED will quickly flash 1-6 times to confirm your selection.
HOLD
TAP
+
Gears of War 2 Weapons
1. Lancer/Hammerburst
2. Pistols
3. Shotgun
4. Sniper/BoomShot
Gears of War 3 Weapons
1. Lancer
2. Hammerburst
3. Pistols
4. Sniper/BoomShot
5. Shotgun
6. Retro Lancer
Pg. 6
Each rapid fire mode can be programmed to one of 55 different speed between 4 and 50
shots per second. You can also set the burst fire for each mode from 2 – 10 shots per burst.
Enter/Exit the Programming Mode:
To enter or exit the programming mode you must first press and hold the mod button and
within 2 seconds press and hold both the left and right triggers. Continue to hold all three for
5 seconds. You will see the player 4 LED flash on for 2 seconds then go out. You have now
entered or exited the programming mode and can release both triggers and the mod button.
Change Rapid Fire Speed:
To change the rapid fire speed you only need to press and release the left or right trigger.
The right trigger to make the speed faster and the left trigger to make it slower. The player 4
LED will flash every time you press the right rigger and the player 3 LED will flash every time
you press the left trigger to indicate you have made a change. Once you have reached the
MIN or MAX speed the LED will no longer flash.
Change Burst Fire Quantity:
To change the number of shots fired with the burst fire you must HOLD down the X button
and while holding follow the same procedure as changing the rapid fire by pressing the left
or right triggers.
Check Rapid Fire Speed Setting:
To check the currently set rapid fire speed you only need to tap the mod button. The player 3
LED will flash the “tens” and position and the player 4 will then flash the single digit.
(example. Player 3 flashes 3 times, followed by the player 4 flashing 6 times, you are now at
speed setting 36) Refer to the table on the next page for all of the speed settings.
Check Burst Fire Setting:
To check the currently set burst fire setting you must HOLD the X button and while holding X
tap the mod button. The player 4 LED will flash 2-10 times to indicate the number of shots
set for the burst fire.
Reset Current Mode to Default Settings:
To reset the rapid fire mode you are currently editing to the factory default you must HOLD
both the left and right triggers together for 7 seconds. After 7 seconds the player 3 and 4
LED’s will both flash very fast for 2 seconds and the programming mode will automatically be
exited with the default settings saved for that mode only.
MASTER RESET:
Resets ALL modes, speeds and sub modes to their default settings. HOLD (A + B + X + Y) for 7
seconds. You will see the player 3 LED flash then the player 4 LED, then both. All
settings will be set to factory default and the programming mode will be exited.
Programming the Adjustable Rapid/Burst Fire Settings
+
HOLD
+
HOLD
(5 sec)
TAP
or
TAP
+
TAP
or
TAP
+
HOLD
+
HOLD
(7 sec)
+
+
+
(7 sec)
