Pg. 1
CONTENTS
Page 1:
Rapid Fire, Burst Fire, Akimbo (Dual Trigger)
Page 2:
Default Modes, Changing Modes, Mimic
Page 3:
Sub Modes, Jitter Fire, Drop Shot, Drop Shot (tactical layout)
Page 4:
Jump Shot, Quick Scope, Auto Aim, COD Fast Reload
Page 5:
Battlefield Auto Spotting, GOW Perfect Active Reloads
Page 6:
Adjusting and Programming modes
Page 7:
Programmable speed settings table
Page 8:
Advanced Feature management
Rapid Fire
To activate rapid fire tap the “
Mod
” button located on the back of the
controller. You will see the player 4 LED start flashing indicating Rapid Fire is
now activated. To turn off rapid fire tap the “
Mod
” button again and the
player 4 LED will stop flashing indicating rapid fire is turned off.
Burst Fire
To activate burst fire HOLD the “
X
” button and then tap the “
Mod
” button.
The player 4 LED will turn on solid to indicate that burst fire is activated. The
burst fire will fire at the current speed/burst settings which can be adjusted
within programming mode. You can tap the “
Mod
” button to turn burst fire
on/off while activated. To deactivate hold “
X
“and tap the “
Mod
” button.
+
Akimbo (Dual Trigger Rapid Fire)
With akimbo activated you will have rapid fire on both the left and right
triggers (independently), this is great for akimbo or dual weapons in Call of
Duty and other FPS games. To activate akimbo HOLD the “
left trigger
” and
tap the “
Mod
“ button, repeat to deactivate. While active the player
3 LED will remain lit.
+
HOLD
Pg. 2
MODE
SPEED
COMPATIBLE GAMES
Mode 1:
7.7sps
COD MW2/MW3/Black Ops: Semi-Auto Rifles
Mode 2:
11.35sps
Call of Duty (ALL): Pistols/Snipers
Mode 3:
14.28sps
COD Black OPS 2: Semi-Auto Riffles
Mode 4:
16.67sps
GTA 4, RDR, COD: Autos, Left 4 Dead
Mode 5:
20sps
Halo series
Mode 6:
8.33sps
COD - Word at War Only - Riffles
Mode 7:
10sps
COD - Word at War Only - Pistols
Mode 8:
6.85sps
Gears of War - Hammerburst
Mode 9:
8sps
Gears of War - Pistols
Mode 10:
20sps
Open Mode – Default 20 SPS
Mode and Default Speed Chart
Changing Modes
There are 10 modes to select from. Each is pre-programed with a specific
speed, but can be independently programmed to an new speed (See page
6). To change to the next mode you must HOLD the “
Mod
” button on the
back of the controller for 3 seconds. You will see the player 3 & 4 LEDs flash
together, count the number of flashes of the LEDs. This will indicate which
mode you are currently in. (2 flashes = Mode 2, 3 flashes = Mode 3, etc…).
You can also scroll back to the previous mode by holding the right trigger
along with the mod button.
Mimic (Auto Akimbo)
To activate or deactivate HOLD the “
back
” button and tap the “
right
trigger
”. When using mimic , the right trigger controls both the left trigger
and the right trigger at the same time. If the left trigger is enabled for rapid
fire (see page 1) and rapid fire is turned ON than the left trigger will also
rapid fire, otherwise it works as normal allowing you to scope automatically
when firing.
+
HOLD
TAP
