10
49-1000110 Rev. 0
Installation Instructions
INST
ALLA
TION INSTRUCTIONS
REINSTALLATION
1. Remove the lower hinge pin from the lower hinge
by turning counter clockwise. Move the pin to the
opposite hole and tighten.
2. Tilt refrigerator on a 45-degree angle to have access
to the bottom front.
3. Remove both left and right front feet from bottom.
4. Loosen the screws holding the bottom hinge and
remove it.
5. Align the holes in the bottom hinge to the
corresponding holes on the opposite side of the
cabinet. Insert and tighten the screws. Reinstall both
front feet.
6. To install refrigerator door: Line up the left bottom
hole of the refrigerator compartment door over
the bottom hinge pin. Move door forward to make
it straight and align with middle hinge. Install the
middle hinge again, and turn the hinge pin until it
completely enters the door body. Secure it with the
screws provided.
NOTE:
Remove plugs from doorframe and install on
other side.
7RLQVWDOOIUHH]HUGRRU/LQHXSOHIWERWWRPKROHRIWKH
door over the middle hinge middle pin. Move door
IRUZDUGWRPDNHLWVWUDLJKWDQGDOLJQZLWKIUHH]HU
compartment. Place the hinge cover over the left
side of the top hinge, align holes with hole on the
refrigerator top and tighten with the screws provided.
Insert the top hinge plug into the holes on the
cabinet top from which you previously removed the 3
hinge screws
REVERSING THE DOOR SWING (CONT.)
WARNING
Follow all steps when reversing the door swing. Failure to follow these instructions, leaving off
parts, or overtightening screws, can lead to the door falling off and result in injury and property damage.
CAUTION
Two People Required
Bottom
RI8QLW
Bottom
Hinge
Lower
Hinge Pin
Screw
Holes
Doorstopper
(left side)
Middle
Hinge Pin
Middle
Hinge
Summary of Contents for VPS10FGMBB
Page 15: ...49 1000110 Rev 0 15 Notes ...
Page 31: ...49 1000110 Rev 0 15 Notas ...