Consair CAMU D2 is an effective and energy efficient source
extractor, which is easy to use and move at the construction
site and which is designed for the professional extraction of
dust produced by the mixing of dry matter, such as concrete,
mortar, and plaster.
The Consair CAMU D2 source extractor can collect over
99% of the dust produced in the mixing area. The effective
and automatically adjusted suction air flow guarantees that
the CAMU D2 source extractor operates at full capacity
throughout the entire lifecycle of the filters.
With the aid of the advanced pressure measurement sys-
tem, CAMU D2 is able to detect if either the main filter or
pre-filters are clogged.
The indicator lights in the control panel indicate if the filters
need to be replaced.
The CAMU D2 pre-filter equipped with a dust-collection
container developed by Consair Oy is able to collect 750–
1,500 g of dust produced by the mixing of dry matter. This
amount of dust is produced when approximately 5,000 kg of
dry matter is mixed.
Thanks to the pre-filter equipped with a dust-collection
container, there is no need to handle dust-producing filter
materials in connection with filter replacement. Thus, the fil-
ters can be changed without releasing any dust into the air.
The source extractor has been designed to be primarily used
with 20-litre mixing containers. When the height of the de-
vice is increased by, e.g., lifting it onto a pallet, it is also suit-
able for use with large mixing containers.
CAMU D2 protects both the worker and working environ-
ment from dust and prevents mixing splatter from spreading
outside the workstation.
Since the device can be used as both a personal and joint
workstation, it is suitable for use in both construction and
renovation sites.
This instruction manual describes the operation of the Con-
sair CAMU D2 source extractor. In this manual, it is also re-
ferred to as the ‘device’ or ‘machine’. Read the instruction
manual before implementation and familiarise yourself par-
ticularly well with the safety regulations.
The instruction manual is also available at www.consair.eu.
If you wish to obtain more information about the Consair
CAMU D2 source extractor, contact the manufacturer, re-
tailer, or leasing company.
1
2
Intended purpose
The Consair CAMU D2 source extractor has been designed
for indoor use, and it may only be used for the processing
of dry matter, such as dry-mix concrete and mortar. The
device may not be used for the processing of materials
containing explosive, flammable, or harmful substances,
such as asbestos.
If the CAMU D2 source extractor is, however, used for oth-
er purposes or handled in a manner other than the one de-
scribed in this instruction manual, Consair Oy will not as-
sume responsibility for the consequences of the incorrect
use.
3
Important information
!
2
Introduction
Consair CAMU D2
5
Warranty
The Consair CAMU D2 source extractor has a 12-month war-
ranty that covers material and manufacturing defects.
No modification or repair work may be carried out on the
structure of the machine without the manufacturer’s con-
sent. The warranty does not cover defects that are caused
by careless or incorrect use, negligence, or normal wear
and tear. In the case of a complaint, the machine must be
returned to the manufacturer for possible repair or replace-
ment.
The device is delivered with a pre-filter (1 pcs), main filter (1
pcs), and air-guiding/splashguard doors (2 pcs).
The filters and door panels are consumable parts. New filters
and door panels can be ordered from either the manufactur-
er, retailer, or leasing company.
4
Delivery content
