Intended use
The product is used to measure, analyse and display radio signal (for frequency range and
other technical data, see the manufacturer’s English operating instructions).
The device is supplied with voltage/current by an integrated lithium ion battery that can be
recharged with a suitable USB cable (e.g. using the USB port of a computer, USB hub with
power adapter or using an appropriate USB power adapter).
The safety instructions must be observed at all times!
Any use other than that described above could lead to damage to this product and involves
the risk of short circuits, fire, electric shock, etc. No part of the product may be modified or
converted!
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Spectrum analyser
• With item no. 1386330: 2x antennas; with item no. 1386329: 1x antenna
• Only with item no. 1386330: storage bag
• Manufacturer’s operating instructions in English
• Quick guide
Up-to-date Operating Instructions:
1. Open produktinfo.conrad.com in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the query
you can download displayed records.
Explanation of symbols
The exclamation mark indicates specific risks associated with handling, function and
use.
The “Hand” symbol indicates special tips and operating information.
Safety instructions
Damage due to not following these operating instructions will void the war-
ranty! We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. In such cases,
the warranty will be null and void.
a) General
• The unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons (CE). Do not disassemble the product.
• Any maintenance or repair work may only be performed only an expert.
• Do not leave packaging material carelessly lying around, since it could become a
dangerous plaything for children.
• In commercial institutions, the accident prevention regulations of the Employer’s
Liability Insurance Association for Electrical Systems and Operating Facilities are
to be observed.
• If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.
b) Operation
• The product is not a toy and does not belong in the hands of children.
• The product may be installed and used only in dry indoor spaces; it must not get
damp or wet.
• The product should not be exposed to extreme temperatures, direct sunlight, in-
tense vibrations or heavy mechanical stress. Protect it against dust and dirt.
• Never use the product immediately after it has been taken from a cold room into
a warm one. The condensation that forms can ruin the product under certain cir-
cumstances.
Allow the product to reach room temperature before connecting it to the power
supply and putting it to use. This may potentially take several hours.
• Prevent the following adverse conditions at the location of installation and during
transport:
- Dust or flammable gases, fumes or solvents
- strong vibrations, impacts or blows
- strong magnetic fields such as those found in the vicinity of machinery or loud-
speakers
• Safe operation can no longer be assumed if:
- the device is visibly damaged
- the device no longer works
- the device has been stored under adverse conditions for a long time
- It was exposed to heavy loads during transport
• Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
c) Internal rechargeable battery
• The rechargeable battery is permanently installed and cannot be replaced.
• Never throw the product into a fire. There is danger of fire or explosion due to the
rechargeable batteries!
•
Therefore, recharge the battery frequently (latest every 3 months), even if you
don’t use the product. Otherwise, it may result in a deep discharge of the battery,
thus making it permanently unusable.
No initial discharge is required before charging due to the rechargeable battery
technology used.
• Put the device on a heat-resistant surface when charging. A slight warming during
the charging process is normal.
• Never use the product without supervision.
• If the product is damaged, the integrated battery might also be damaged. This can
cause fluids to leak out that can cause chemical burns on the skin. Therefore, use
suitable protective gloves.
• Liquids leaking from rechargeable batteries are very chemically aggressive. Ob-
jects or surfaces coming into contact with these liquids might be considerably
damaged.
G
O P E R AT I N G I N S T R U C T I O N S www.conrad.com
Spectrum Analyser
“RF Explorer”
Item no. 1386329 (1 antenna)
Item no. 1386330 (2 antennas)
Version 12/15
