These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
V1_0513_02-ETS-Mkde
Connected USB devices will not function if the PCI card is not connected to the power supply!
• If necessary, fasten all cables using cable ties to prevent them from hanging into your computer’s CPU fan.
• Reclose your computer’s case.
• Connect your computer and monitor to the power supply, and turn on all devices.
• If your computer does not start up normally, turn it off immediately, and check all settings and cable
connections.
Before reopening your computer, disconnect it from the power supply; see above!
Driver installation
• After Windows starts, it automatically recognizes the PCI card as new hardware.
• Insert the included CD into the corresponding drive on your computer.
At the time this user manual was written, the driver was located as an installation program in
the directory “USB 3.0 Host” and there in the subdirectory “NEC”.
Start Windows file manager and launch the installation program located in the above-named
directory.
It may be necessary to restart Windows for the PCI card’s USB 3.0 ports to work properly.
Connecting USB devices to the PCI card
Important:
The PCI card must be connected to a fitting connector on your PC power adaptor.
Otherwise USB devices connected to the PCI card will not be properly recognized!
a) USB 2.0/1.1 devices
• A USB 3.0 port also supports “old” USB 2.0/1.1 devices. Simply connect the USB device to one of the
PCI card’s USB ports.
• Use USB 2.0/1.1 connection cables to connect USB 2.0/1.1 devices.
• USB 2.0/1.1 devices will not work faster when operated from a USB 3.0 port. However, if the USB 2.0
controller on the mainboard works relatively slow, it may be possible that, for example, USB 2.0 hard drives
transfer data more quickly when connected to one of the PCI card’s USB 3.0 ports.
b) USB 3.0 devices
• A USB 3.0 cable is needed to connect a USB 3.0 device to the PCI card. A USB A plug may look a
great deal like a USB 2.0/1.1 plug, however it has additional connecting components. A USB B plug on a
USB 3.0 cable has a different form.
• To use the USB 3.0 at its full speed, in addition to a USB 3.0 port on your computer, you also need a
USB 3.0 device and a fitting USB 3.0 cable.
• In theory, USB 3.0 offers a data transfer speed of 5 Gbit (about 600 Mbyte/s). However, the actual speed
reached during operation will depend on the devices transferring data (internal and external hard drive),
the type of data (many small files or few large files) and many other factors.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Slot ................................................... PCI
USB connections .............................. 2 x USB 3.0
System requirements ........................ Windows® XP SP1, SP2, SP3 (only 32 bit)
..........................................................
Windows® Vista™ (32/64 bit)
..........................................................
Windows® 7 (32/64 bit)
..........................................................
Windows® 8
..........................................................
Linux Kernel 2.6.31 or later
Dimensions (W x H x D) ................... 122 x 14 x 57 mm (without slot bracket)
Weight .............................................. 54 g
2 port USB 3.0 PCI card
Version 05/13
Item no. 40 88 65
Intended use
This product is intended to be installed in a PCI board slot in your computer to provide two external USB 3.0
ports.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• USB 3.0 PCI card
• Low-profile slot bracket (for installation in flat computer cases)
• CD with driver
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• Electrostatic charges may damage electronic components. Do not touch electronic components
with your bare hands.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Jumper configuration
PCI bus clock speed
Jumper position
33 MHz
Pin 2 + 3
66 MHz
Pin 1 + 2
Installation
If you do not have thorough knowledge on the installation of this product, have the
installation carried out by a professional or in a specialist shop!
Incorrect installation of the product will cause damage to the product, your computer and
all connected devices.
Caution, Risk of fatal injury!
Turn off the computer in which you wish to install the product, and all connected devices.
Disconnect all devices from the power supply by unplugging them. Simply turning off the
devices using the on/off switch does not mean a device is voltage-free!
• Open your computer’s case and remove the lid carefully.
• Find a free PCI slot, remove the corresponding slot bracket and insert the PCI card into the PCI slot. Screw
the PCI card in tight, make sure that it sits correctly in the PCI slot!
A low-profile slot bracket is included for installation of the product in flat computer cases.
Remove the long slot bracket from the PCI card and then mount the short low-profile bracket.
• Connect a fitting plug from your PC power supply to the appropriate connector on the PCI card. Make sure
the plug is connected properly, and do not use force.
