3. PARTS OF REMOTE CONTROL
4. CHARGING PROCEDURE
The charging method of the USB charger ( 3.7V lithium )
1. Connect the USB charger cable to the computer interface or the USB adapter, then connect the
cable to the charging port
.The red indicator turns on when charging. About 60 minutes later,
the indicator turns off, showing that charging is completed.
2. Use crossing screwdriver to wrench the screws on the backward of the the controller in
anti-clockwise direction, open the battery cover. Insert 2 AAA battery inside then close the battery
cover and screw it in clockwise direction.
5. CONTROL METHODS
The process of frequency infrared RC wall climing car.
1
.
Turn on the RC car switch to “on” position, the wall climing mode is opened. Turn on the RC car
switch to the middle of on and off, the floor mode is opened.
2. Then turn on the transmitter switch to “on” position, the red indicator of the controller keeps on,
showing the frequency bind is successful.
3. About the demo function, when turn the switch of “demo”on, the red indicator of the controller
flashing, showing the demo mode is opened, the car can do the action by itself.
4. Control range of the remote control car is under 8 meters. Pls avoid to overstep this control range
Otherwise the remote control car will be out of controlled.
5. Play time of the RC car, if on a full charge condition. The remote control car could be used about
20-25
mintutes when it played on the floor. If it is played on the wall, the play time is about
7-10 minutes.
Demo
Left trimmer
Forward back
ON/OFF
Right trimmer
ABC Channel
Turn left
Turn right
6. DELIVERY CONTENT
1. RC car with 3.7V 500mAh Li-ion rechargeable battery inside *1
2. Controller * 1
3. USB cable * 1
4. Manual * 1
-2-
