3.
Once the preset number is chosen, it will keep flashing for 5 seconds. Press SET
button once within these 5 seconds, then the tuned station will be memorized in
this chosen preset number and the LED will stop flashing and change to show the
frequency. If the SET button is not pressed within these 5 seconds, then the LED
will jump back to show the frequency, and the memory storing does not succeed.
TUNING INTO A PRESET STATION
1.
Press or MEMORY – once to tune the radio to the station stored in the
preset number next to the last loaded one.
2.
After the preset number is chosen, the LED shows the radio frequency after 2
seconds.
Important Note
:
Please do NOT hold (press continuously) the SET button in this
stage, or the unit will enter the mode of presetting the station. In this case, do not
press any button until the LED stops flashing, or the preset memory may easily be
disturbed by your wrong operation.
TIME SETTING
1.
Plug the unit into the AC mains, “0:00” will appear and flash.
2.
Press HOUR (8) for hour setting.
3.
Press MINUTE (7) for minute setting.
4.
Press SET button once or wait for 5 seconds, the clock will start running from the
set time.
5.
Switch off the radio, press and hold SET button for 1 second until the display
flashes, then follow step 2, 3 & 4 above to set the new time.
DUAL ALARM FUNCTION
Each alarm function can be set independently. When any alarm is set to wake by
radio, please select the desired band, station and volume level before turning off the
radio.
ALARM SETTING
