•CD-RW
•The ability to play certain recordable discs may depend on the quality or physical
condition of the disc, the quality of the recording, or characteristics of the recording device
or software application. Playback cannot be guaranteed in all situations.
This is not an indication of any problem with the unit.
CD playback operations
To access the CD mode:
•Press
FUNCTION
key repeatedly until CD mode is selected.
•The CD icon lights on the display when CD mode is selected.
To start CD playback:
1. Press the OPEN / CLOSE position on CD door to open the disc compartment door
“
- - - -
”
shows on the display.
2. Load an audio CD or data CD on to CD tray.
3. Press the CD door at the edge to close the disc compartment door. The unit should
read the disc information. Audio CD Total number of tracks
To operate the playback:
1. Press
to start playback.
2. During playback, press
to pause it. Press again to resume.
3. Press
or
to skip to the previous or next track.
4. Press and hold
or
to scan backward or forward within the same
track/ file. Release the button to resume to playback at normal speed.
5. Press
to stop the playback.
To program the playback:
The program playback mode lets you program a total of 20 tracks in any desired order.
You can also program the same track to play several times within a program
sequence.
1. In CD mode, press
to stop any disc playback.
2. While playback is stopped, press
key
•
P
01
show on the display and blinking.
P
stands for program mode whereas 01 stands for the first program location.