Akasa USB 2.0 Hard Disk Docking Station
Version 05/10
Item no. 97 37 84
Intended use
1.
The product can be used to connect a 8.89 cm (3.5”) or a 6.35 cm (2.5”) SATA hard disk drive to a computer
(via USB 2.0), without installing it in the enclosure. An external mains transformer (for 100 - 240 V~ / 50/60 Hz)
provides the power supply.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and approval
reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to
associated risks such as short-circuit, fire, electric shock, etc. Please read the operating instructions thoroughly
and keep them for further reference.
Content of delivery
2.
Docking station
•
USB cable
•
eSATA cable
•
Power transformer
•
Operating instructions
•
Safety instructions
3.
We do not assume liability for resulting damages to property or personal injury if the
product has been abused in any way or damaged by improper use or failure to observe
these operating instructions. The warranty/ guarantee will then expire!
The icon with exclamation mark indicates important information in the operating
instructions. Carefully read the whole operating instructions before operating the device,
otherwise there is risk of danger.
Persons / Product
The product is not a toy and should be kept out of reach of children!
•
When used in conjunction with other devices, observe the operating instructions and safety notices of
•
connected devices.
The device should be handled with care. Do not drop it, as it may be damaged by the impact.
•
The product must not be subjected to heavy mechanical stress.
•
The product must not be exposed it to extreme temperatures, direct sunlight, intense vibration, or
•
dampness.
If there is reason to believe that safe operation is no longer possible, the device is to be put out of operation
•
and secured against unintended operation. Safe operation is no longer possible if the device:
shows visible damages,
-
no longer works,
-
was stored under unfavourable conditions for a long period of time or
-
was subject to considerable transport stress.
-
Handle the product with care, it can be damaged by impact, blows, or accidental drops, even from a low
•
height.
Only use the external power transformer supplied to power the unit.
•
Do not move the product when it is in operation. Never pull out the hard disk drive, when the docking station
•
is switched on. After switching off, wait for at least 30 seconds before pulling out the hard disk.
Grasp the hard disk laterally in the housing, do not touch the plate with the electronics. Electrostatic
•
discharge can destroy the hard disk and the docking station.
When setting up the product, make sure that the cables are neither kinked nor pinched.
•
Never use the product immediately after it has been taken from a cold room to a warm one. The condensation
•
that forms might destroy your unit. In addition, there is a risk of a fatal electric shock. Allow the product to
reach room temperature, before connecting it to the power supply and putting it in to use. This may take
several hours.
Ensure that the insulation for the entire product is neither damaged nor destroyed.
•
Check the product for damage before each use! If you detect any damage, do NOT connect the unit to the
•
mains voltage! This presents a danger to life!
Miscellaneous
Servicing, adjustment or repair works must only be carried out by a specialist/ specialist workshop.
•
If any questions arise that are not answered in this operating instruction, contact our Technical Advisory
•
Service or other experts.
Operating elements
4.
1
3 4 5
6
2
Hard disk eject button
1.
Power On/Off button
2.
On/off button for the blue LED on the base
3.
12V/DC IN socket
4.
USB port
5.
eSATA port
6.
Connection
5.
Connect the low-voltage from the supplied transformer to the correct input on the rear of the housing.
1.
Plug the mains transformer into a mains socket.
2.
Connect the USB or eSATA connector, on the rear, to a free USB2.0 or eSATA port on your computer, using
3.
the USB cable supplied.
Do not use eSATA and USB connections at the same time.
ESATA
ESATA
USB
eSATA
Inserting a Hard Disk
6.
First, switch off the docking station (on/off switch on the top, the power LED is off).
1.
Insert a 8.89 cm (3.5”) or 2.5 SATA hard disk vertically into the upper opening, so that the terminal block of
2.
the SATA hard disk fits exactly on to the plugs inside the docking station (if you press the dust cover slightly
with a finger, you can see the plugs inside the docking station).
Do not exert force during insertion! However, the terminal blocks on the SATA hard disk must
lock into place.
Switch on the docking station.
3.
A new hard disk has to be partitioned and formatted before it can be used and displayed.
If you use an eSATA connection then you may need to restart the system.
Press the LED button (3) at the back of the dock station for the blue LED on the base.
4.
Ejecting a hard disk
7.
First, switch off the docking station (on/off switch on the top, the power LED is off).
1.
Wait at least 30 seconds, so that the magnetic disks can come to rest.
2.
Pressing the left eject button causes a lever to lift up the hard disk mechanically and unlocks the hard disk.
3.
This may be a bit stiff for 8.89 cm (3.5”) SATA hard disks. You can also pull out the hard disks manually,
without pressing the eject button.
Cleaning
8.
Use a clean, dry soft cloth for cleaning. Do not use any aggressive cleaning agents as these may result in
discoloration of the housing.
Tips & Notes
9.
USB2.0 devices are backwards compatible. This means that the USB2.0 integrated in the hard disk drive can
•
also function with conventional “slow” USB1.1 ports, but then only at the maximum USB1.1 speed (effective
max. ca. 1MByte/s). With USB2.0 several MBytes/s are possible, depending on the motherboard/PC.
Always treat hard disks with care. Impacts during operation (also for a few seconds after switching off) may
•
cause the write/read head to touch the magnetic disk, which destroys the hard disk!
Disposal
10.
In order to preserve, protect and improve the quality of environment, protect human health and
utilise natural resources prudently and rationally, the user should return unserviceable product to
relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as
municipal waste.
Technical data
11.
General
System requirements:
Microsoft ® Windows 2000 / XP / Vista / 7™, Mac OS® X or above
Supply voltage:
12 V/DC
Maximum current consumption: 2 A
Suitable for:
6.35 cm (2.5”) or 8.89 cm (3.5”) SATA I / II hard disk
Connection:
USB 2.0 / eSATA
Data transmission rate:
480 Mbit/s, 3 Gbit/s (eSATA)
Dimensions (W x H x D):
140 x 108 x 71 mm
Weight:
415 g
Power Adapter
Supply voltage:
100 - 240 V~ / 50/60 Hz
Maximum current consumption: 0.6 A
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2010 by Conrad Electronic SE.
*02_05/10_01-HL
