![background image](http://html1.mh-extra.com/html/conrad/752001/752001_operating-instructions-manual_2654344045.webp)
18. Troubleshooting
Problem
Possible cause
Recommendation
"NO Connection"
The wireless camera is
Check if the camera is properly powered.
displayed
not supplied with power.
Check the cable connections.
Pairing has not been
See chapter "8. Pairing".
carried out yet.
The camera is out of
Position the camera closer to the
range.
receiver.
No aerial has been
Position the camera and the
screwed onto or
receiver/monitor closer to each other.
connected to the wireless Test different places of installation.
camera.
Signal reception
Aerial is not aligned
Try to adjust the aerial positions on the
is weak
properly
wireless camera and the receiver/
monitor.
Radio signal is blocked
If this is the case, make sure that no
sources of interference are in the vicinity
of the wireless camera or the receiver
(e.g. reinforced concrete walls, metalli-
sed mirrors, thermo windows, metal shel-
ves, other wireless devices such as
WLAN routers etc.).
Camera feed is
Automatic switching
See chapter:
not displayed
between channels is
„13. Quad display or automatic
on the monitor.
active and one or more
switching between channels"
hannels have been
deactivated.
45