![background image](http://html1.mh-extra.com/html/conrad/612990/612990_operating-instructions_2654488002.webp)
6-Way Surge Protection
Version 01/11
Power Outlet Strip 2+4
°
Item-No. 61 29 90
Use in accordance with manufacturer’s instructions
This power outlet strip provides a total of 6 sockets with surge protection; 4 of them can be turned
on/off via the foot switch, the remaining 2 sockets provide continuous voltage.
A total load of maximum 3,680 Watts (230 V/AC, 16 A) can be connected to the outlet strip.
Any use other than that described above may damage the product and may involve other risks,
such as short-circuits, fire and electric shock. No part of the product may be changed or modi-
fied.
Always observe the safety instructions and technical specifications!
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owner. All rights reserved.
Package Contents
• Outlet strip
• Operating Instructions
Safety Instructions
Ꮨ
The warranty will be void in the event of damage caused by failure to observe
these safety instructions. Liability for any and all consequential damage is
excluded!
We do not accept liability for damage to property or personal injury caused by
improper handling or non-compliance with the safety instructions. The war-
ranty will be void in such cases.
• Unauthorised conversion and/or modification of the product is inadmissible
because of safety and approval reasons (CE).
• The product is designed in accordance with protection class I. Only a standard
mains socket (230V/AC, 50 Hz with protective earth) for the public supply grid may
be used as a power source.
• Place the cable in a way so that nobody can trip over it. Do not step on the con-
nection cable. When laying out the cable, make sure that it is not damaged by
sharp edges. Never bend the cable.
When you use the power strip, fully unwind the connection cable. Never bundle the
cable.
• Do not overload the product (take note of the input power in the technical data at
the end of the operating manual!).
• The product may be used only in dry indoor rooms. The product must not get damp
or wet; danger of a fatal electric shock!
• Never touch the product, or the mains plug, with wet or damp hands when trying
to connect it to the outlet strip. There is a risk of a lethal electric shock!
• Never pull out a mains plug that is connected to the outlet strip by pulling on the
cable. Always pull the plug out of the socket by gripping the area provided for this
purpose on its sides.
• Do not cascade the outlet strip. Do not connect several outlet strips in series.
Connect the power plug of the outlet strip to a wall socket; connect devices/loads
directly to the sockets of the power strip.
• Never cover the outlet strip when it is switched on.
• The product is only without current if the power plug of the connection cable is com-
pletely unplugged from the mains socket.
• The product is not a toy and should be kept out of the reach of children.
Therefore, be especially careful when children are around. Children might try to
push objects through the socket openings. There is a risk of a lethal electric shock!
• Any maintenance or repair work may only be performed by an authorised repair
shop; never dismantle the product.
• Do not leave packing materials unattended. They may become dangerous play-
things for children.
• Handle the product with care; it can be damaged by impacts, blows, or accidental
drops, even from a low height.
• If the product casing or the cable is damaged, do not use the product anymore!
When it is connected to the mains, do not touch the outlet strip or a connected
device!
O P E R A T I N G I N S T R U C T I O N S
www.conrad.com
Ꮨ
First, switch off at the mains socket to which the outlet strip is connected (i.e.
switch off at the circuit breaker). Only then may the connected devices be switched
off and unplugged; then disconnect the power plug of the outlet strip from the
mains socket.
Take the product to a specialized workshop or dispose of it in an environmentally
friendly way.
• It can be assumed that safe operation is no longer possible if the product is visibly
damaged, or if it does not work properly or not at all, if the product was stored in
unfavourable conditions, or if it was exposed to heavy loads during transport.
Getting Started
• Connect the power plug of the outlet strip to a proper mains socket.
• The four adjoining sockets can be switched on or off using the foot switch. If the sockets are
switched on, a blue LED lights up on the foot switch and the outlet strip.
Never apply force when stepping on the foot switch, but operate it carefully.
Protect valuable floors or surfaces by using a suitable underlay; otherwise scratch
marks may appear due to the use of the foot switch.
You can connect devices to the four connected sockets that you want to disconnect from the
mains during times of disuse, e.g. to avoid unnecessary costs due to power input while in stand-
by mode.
The other two sockets provide continuous voltage. They cannot be switched on/off via the foot
switch. Here, you can connect devices that e.g. have to be constantly supplied with power (for
example, a SAT receiver for recording or a lamp).
Warning, important!
The total power input of all devices connected to the outlet strip may not exceed
3,680 W.
Maintenance and Cleaning
The product does not require any maintenance and should never be disassembled for any rea-
son. Repair or maintenance work must be carried out by a specialist.
Before cleaning disconnect the outlet strip from the mains voltage; remove the mains plug from
the power socket. Also disconnect all connected loads from the outlet strip.
To clean the outlet strip, a clean, soft and dry cloth can be used.
Dust can be easily removed with a soft, clean brush and a vacuum cleaner.
Do not use any aggressive detergent as this might cause discoloration.
Technical Data
Operating voltage: ..............................230 V/AC, 50 Hz
Power input:..........................................approx. 0.48 W
Total connected load: ..........................max. 3680 W (230 V/AC, 16 A)
Connecting cable: ................................1.5 m (cable cross-section 3 x 1.5 mm
2
)
Cable to the foot switch: ......................1.5 m
Child-proof lock:....................................yes, on all sockets
Dimensions (L x W x H): ......................Approx. 454 x 60.5 x 42.5 mm
Disposal
Dispose of an unserviceable product in line with the relevant statutory regulations.
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2011 by Conrad Electronic SE.