Multi-card reader aluminium 3.0
Version 10/11
Item no. 41 59 05
Intended use
1.
The product is intended for reading and writing to compatible memory cards. It is designed for a
personal computer (PC) with USB 3.0 connection and is backward compatible with USB 2.0 and 1.1.
Only operate the product in a dry indoor environment.
For safety and approval purposes (CE), you must not rebuild and / or modify this product. If you
use the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
Delivery content
2.
Card reader
•
USB 3.0 cable
•
Operating instructions
•
Safety instructions
3.
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
Persons / Product
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous
•
playing material for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
•
moisture, flammable gases, vapours and solvents.
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it
•
from any accidental use. Safe operation can no longer be guaranteed if the product:
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
-
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
•
the product.
Also observe the safety and operating instructions of any other devices which are connected
•
to the product.
Miscellaneous
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
•
qualified shop.
If you have questions which remain unanswered by these operating instructions, contact our
•
technical support service or other technical personnel.
Operation
4.
Switch your computer on and wait until the operating system has completely booted up.
1.
Plug the USB 3.0 plug of the USB 3.0 cable into the card reader.
2.
Plug the USB plug into an available USB port on your computer.
3.
Insert the memory card(s) into the corresponding slot with the correct orientation. SD and XD
4.
cards must be inserted with the bottom side facing upwards.
The card reader or the card may be damaged if the card is not inserted in the
correct orientation.
The micro SD and the M2 slots cannot be used at the same time. Use only one of
them at a time.
A new drive / drives will appear on your computer. Follow the operating instructions for your
5.
operating system to read and write to the card(s).
Some memory card formats (such as exFAT) may require the installation of a system
patch before the card reader can recognize the memory card. For more information,
refer to the operating instructions and the latest update information for your operating
system.
Before removing the memory card(s), perform the necessary operations to ensure it is safe to
6.
remove the card(s). Refer to the operating instructions for your operating system.
Disposal
5.
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
Technical data
6.
Suitable for:
SDXC / SDHC / SD / micro SD / MMC / MS / M2 / CF I / CF II /
microdrive / XD
System requirements:
Windows® 2000, XP SP 3, 7 (32 / 64 bits),
Windows® Vista™ (32 / 64 bits), Mac OS 10.5 or above
Operating voltage:
5 V (via USB)
Current consumption:
max. 300 mA
Cable length:
60 cm
Transmission rate:
max. 5 Gbps
Operating temperature:
0 to +40 ºC
Dimensions (W x H x D): 86 x 16 x 50 mm
Weight:
45 g
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2011 by Conrad Electronic SE.
V1_1011_02-HL
