![background image](http://html1.mh-extra.com/html/conrad/25-lcd/25-lcd_operating-instructions-manual_2654382004.webp)
Reset master und user code to factory setting
• Initially, open the safe door as described above.
• A key button is hidden at the back of the safe door (close to the door axis on
the inside of the door), see circle in the image to the right.
• Press the key button brie
fl
y; the display shows “CLEAR”.
The master code and the user code are now reset to the factory setting.
Master code = 123456
User code = 1234
Tips and Notes
• The product is suitable to store valuables or to protect them from unauthorised access.
The burglar protection is achieved through its construction; e.g. via the steel plate casing and the construc-
tion of the door as well as the applied electronics with access code. Unauthorised access to the items in
the safe is thereby impeded.
• Ensure that you are not being observed by anyone while opening/locking the safe.
• The thick door which contains the locking mechanism does not allow the availability of the entire internal
space of the safe. Carefully close the door, do not use force! This could cause the items inside the safe to
be damaged.
• Never store the two delivered keys inside the safe. It will be impossible to open the safe, if you forget your
master or user code!
• If you have forgotten your master or user code, open the safe with the key delivered and reprogram a new
master or user code.
Maintenance and Care
• Apart from the occasional battery change, the product is maintenance-free for you.
• The safe should only occasionally be cleaned with a clean, soft, dry cloth. Never use aggressive cleaning
agents or chemical solutions as the surface of the housing could be damaged (discolourations).
Disposal
a) Product
Dispose of an unserviceable product in accordance with the relevant statutory regulations.
Remove the inserted batteries and dispose of them separately from the product.
b) Batteries and Rechargeable Batteries
The end user is legally obliged (Battery Regulation) to return used batteries and rechargeable batteries. Do
not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these symbols to indicate that
disposal in the domestic waste is forbidden. The symbols for the relevant heavy metals are:
Cd=Cadmium, Hg=Mercury, Pb=Lead (marked on batteries/rechargeable batteries, e.g. under
the rubbish bin symbol shown to the left).
You can dispose of your used batteries/rechargeable batteries free of charge at your community’s collection
point or any place where batteries/rechargeable batteries are sold!
You thereby ful
fi
ll your statutory obligations and contribute to the protection of the environment.
Technical Data
Power supply ........................... 4 batteries of type AA/Mignon
Dimensions ............................. Outside: 250 x 350 x 250 mm (H x W x D)
Ouside, including turning knob 250 x 350 x 270 mm (H x W x D)
Inside: 245 x 345 x 190 mm (H x W x D)
Door opening ........................... 183 x 240 mm (H x W)
Wall thickness .......................... Casing: 1.5 mm; door: 4 mm
Weight ..................................... 7.5 kg
☞
Variations in dimensions and weight are dependent on the production technique.
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro
fi
lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.
Hide display during entering the code
If you proceed as in “Open safe by entering the code”, the master or user code is displayed while entering.
That can be avoided by brie
fl
y pressing the “*CLEAN” button after starting to enter the code with the button “#START”
(8 lines appear on the display now).
During the following process of entering a master or user code, only an “o” appears on the display instead
of the code number.
Re-set master or user code
☞
Changing the master and user code is done in the same way. Make sure to program a different
code for each one. Memorise this code. If you forget these codes, the safe may only be opened
with the delivered keys.
• Press the “#START” button brie
fl
y, 8 lines appear on the LC display („- - - - - - - -“).
• Enter the current code (either master or user code). Correct an input mistake by pressing the „*CLEAN“
button.
The basic setting of the delivery uses the master code “123456” and the user code “1234”.
• Press the “#START” key.
• The word “OPEN” appears on the display if the correct code is entered.
• Press the „*CLEAN“ button within 7 seconds and 8 lines appear in the LC display („- - - - - - - -“).
Now enter a new code (1....8 digits). Correct an input mistake by pressing the „*CLEAN“ button. We recom-
mend to program a code with at least 4 digits.
• Con
fi
rm the code with the button „#START“. The display shows „INTO“; the new master or user code has
been saved.
Alarm sound during movement
Strong movements of the safe (e.g. opening by force or de-installation from the wall) triggers an alarm sound.
It can be stopped by entering the correct master or user code.
Press the button “0” to switch on the function.
☞
Due to safety reasons, the function may not be deactivated via keystroke.
If you wish to deactivate the function, remove the batteries for several seconds and place them
back in the safe. This causes the settings for date, time, week days and the data sets for the
opening processes to disappear.
Setting the date, time and the weekday
• Press the button „*CLEAN“ during the normal display (not while entering a code). The display for the year
starts
fl
ashing.
• Set the year with the buttons “0” (downward) or “8” (upward).
• Change to month, date, hours or minutes as well as the week day with the button „#START“ and set the
desired value with the buttons „0“ (downward) or „8“ (upward).
Upper line: YY-MM-DD = year-month-date
Lower line: HH-MM = hours-minutes; additionally, the week day (Monday...Sunday).
• The setting mode is automatically completed each time you do not press a key for about 3 seconds. The
settings are saved.
Display data sets for the opening processes
The safe saves the last 14 successful opening activities in one data set including date and time as well as
the used code. You may display these as follows:
• Press the „#START“ button brie
fl
y, 8 lines appear on the LC display („- - - - - - - -“). The display light is
simultaneously activated.
• Enter either the master code or the user code. Correct an input mistake by pressing the „*CLEAN“ button.
Con
fi
rm the code with the button “#START”.
• If the code is correct, the display shows “OPEN” and an acoustic signal appears.
• If the display „OPEN“ disappears but the display light is still activated, press the button „0“ immediately.
Now the date (YY-MM-DD = year-month-date) and subsequently the time (HH-MM = hours-minutes) of the
last opening activity are displayed.
In addition, “PASS1” is displayed for the user code and “PASS2” for the master code.
☞
The
fi
rst displayed data set corresponds to the current date/time and the currently used code
type.
• To show the next data set, press the „0“ button exactly when „PASS1“ or „PASS2“ is displayed. Or else, the
display mode is automatically terminated.