2
Operating Instructions
Flickering LED Candle Light, Solar Charging,
Ground Spike, IP44
Item no: 2388773 (Red)
Item no: 2388774 (White)
1 Intended use
The product is an LED light for cemetery graves. This model has:
■
solar charging
■
non-removable rechargeable battery
■
dusk to dawn sensor
■
flickering candle effect
Important:
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor use. Do
not submerge in water.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
Ground spike
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the appliance.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Battery
■
The rechargeable battery is permanently built into the product and cannot be replaced.
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might
cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product
into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due to the re-
chargeable battery technology being used, you do not need to discharge the rechargeable battery
first.
5.6 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
6 Ground spike
Important:
■
A stony subsurface can damage the ground spike(s).
■
When driving the spike(s) into the ground, hold the product by the base. Holding the product by
the head can damage it.
1. Attach the plastic ground spike to the base of the product.
2. Drive the spike(s) into the ground.
7 Solar charging
■
The solar panel should be exposed to maximum sunlight. Do not set up the product in the shade or
under any cover.
■
When using the product for the first time or after prolonged periods of low sunlight, switch the power
ON
and recharge battery for 6 – 8 hrs under bright sunlight. The battery will not recharge if the power
is switched
OFF
.
■
Long periods of low sunlight (e.g. cloudy weather or during winter) will cause the rechargeable battery
to recharge less during the day.
■
To maximize charging efficiency, keep the solar panel(s) clean and free from debris.
8 Operation
■
Access the
ON
/
OFF
switch on the underside of the cover cap.
■
If the switch is set to
ON
, the integrated ambient light sensor will:
– Switch the light ON when the ambient brightness level falls (darkness).
– Switch the light OFF when the ambient brightness level rises (daylight).
9 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Clean the product with a dry, fibre-free cloth.
10 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
11 Technical data
Power supply ........................................
1x 1.2 V 600 mAh Ni-MH rechargeable battery
Solar panel ............................................
2 V, 45 mA
Battery recharge time ............................
6 – 8 hrs (depending on ambient light conditions)
Battery life..............................................
8 - 10 hrs (depending on ambient light conditions)
Brightness..............................................
2 lm
Colour temperature................................
2500 K (warm)
LED .......................................................
Quantity: 1 pcs, Lifespan: 10000 hrs, Voltage: 3 V, Power:
0.06 W, Current: 20 mA
Operating/Storage temperature.............
-20 to +40 °C
Dimensions (Ø x H) ..............................
67 x 117 mm
Weight (approx.) ...................................
65 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2388773_2388774_V2_1221_dh_mh_en
pj-id: 9007199580659211
i/o: I2/O2
edtl-id: de
