![Conrad 2388667 Operating Instructions Download Page 2](http://html1.mh-extra.com/html/conrad/2388667/2388667_operating-instructions_2654006002.webp)
5.5 Use
CAUTION:
Overloading can break the wall bracket and result in personal injury from
falling objects. Only load with max. 5 kg.
Check that the product is secure and safe to use every
3 months
.
If it is no longer possible to use the product safely, take it out of operation and protect it from
any accidental use. DO NOT attempt to repair the product yourself. Safe use can no longer
be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
6 Installation
Item No. 2388666
Note:
The included screws and dowels can be used to attach the vacuum cleaner’s wall mount.
7 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
Clean the wall bracket with a dry, fibre-free cloth.
8 Disposal
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
9 Technical data
Permissible load ........................... max. 5 kg
Dimensions (W x H x D) ............... 232 x 85 x 42 mm
Weight .......................................... 380 g
Operating Instructions
Wall Bracket for Dyson Vacuums
Item No. 2388667
1 Intended use
This product is a wall bracket for Dyson vacuums accessories. Use the product to store and
organize up to 5 vacuum attachments. The product is intended for indoor use only. Do not use
it outdoors.
Only use the product in combination with the following Dyson products:
Vacuum
Stand
V7 Pro/Fluffy
V8 Fluffy/Absolute
Cyclone V10 Fluffy/Absolute/Total Clean
V11 Torque Drive/Animal
V12 and V15
Vacuum Cleaner Floor Stand
(item no. BN 2388666)
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery content
Wall bracket
2x ST4.8 screw (35 mm)
2x Dowel (ø6 x 30 mm)
Hex key
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code
shown. Follow the instructions on the website.
4 Symbols in this document
The symbol warns of hazards that can lead to personal injury. Read the information
carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
The device is not a toy and contains small items that could be a choking hazard if
swallowed. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
5.3 Installation environment
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from direct sunlight.
5.4 Assembly
Follow the assembly instructions. Improper assembly may result in product damage or
serious personal injury.
Only use the assembly screws provided.
Do not over tighten screws.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE. *2388667_v2_0222_02_jh_m_4L_(1)