28
• Make sure you switch off the machine after use by setting the on/off switch (10) to “O”.
•
The machine must be allowed to cool down completely before cleaning it.
Let the machine cool down again if you wish to prepare an espresso after preparing milk froth. For this
purpose, put a cup under the filter holder outlet (6) and turn the rotary switch (3) to the
position.
Discard the amount of water equal to the one needed to prepare a cup of espresso. After that the machine
is ready for brewing espresso.
f) Preparing hot drinks
The superheated steam function can also be used to prepare hot drinks or hot water (e.g. tea).
The procedure is the same as for the preparation of milk froth, the only difference being that no milk is frothed in a milk
frothing jug, but the hot steam that is produced is added to the hot drink or water. This is how hot drinks are heated.
The steam outlet (11) is immersed deeper in the drink.
g) Automatic shut-off
The appliance features an automatic shut-off function. This function reduces electricity consumption and extends
service life of the appliance.
•
If the machine is not operated for about 25 minutes, it shuts off automatically. To resume operation of the machine
after automatic shut-off, set the on/off switch (10) to “OFF” and then to “ON” again.
•
In coffee preparation mode, the pump shuts off automatically after 90 seconds of continuous operation. Then turn
the rotary switch (3) back to the position.
•
In milk froth preparation mode, the pump shuts off automatically after 180 seconds of continuous operation. Then
turn the rotary switch (3) back to the position.