![background image](http://html1.mh-extra.com/html/conrad/1404311/1404311_operating-instructions_2654349002.webp)
Intended use
The product is for the reception of Digital Video Broadcasting - Terrestrial (DVB-T).programs The TV program
can be displayed or even recorded with the PC software included (Windows XP and higher).
This product complies with the applicable national and European requirements. All names of companies and
products are the trademarks of the respective owner. All rights reserved.
Package Contents
• DVB-T stick
• Telescopic antenna
• Stand antenna with magnetic foot and connecting cable
• Antenna adapter
• IR Remote control with battery (1x CR2025)
• CD
• Operating Instructions
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe these safety
instructions! We do not assume any liability for any consequential damage!
Nor do we assume any liability for material and personal damage caused by improper use
or non-compliance with the safety instructions! In such cases, the warranty will be null
and void.
• The unauthorised conversion and/or modi
fi
cation of the product is not permitted for safety and
approval reasons (CE).
• The device is not a toy and has no place in the hands of children. The product contains small
parts that can be swallowed, and a battery (IR remote control).
Use the product where it is out of the reach of children.
• The product is only intended for use in dry, enclosed spaces, it must not get damp or wet.
• Keep the magnetic foot of the stand antenna away from magnetic cards (e.g., cheque card),
wrist watches etc., as otherwise it can lead to damages.
• Do not leave packaging material carelessly lying around, since it could become a dangerous
plaything for children.
• Handle the product with care, it can be damaged by impacts, blows, or accidental falls, even
from a low height.
IR remote control
a) General battery instructions
• Batteries should be kept out of the reach of children.
• Do not leave batteries lying around in the open; there is a risk of them being swallowed by children or
domestic animals. If they are swallowed, consult a doctor immediately.
• Leaking or damaged batteries can lead to caustic burning of the skin. Therefore, use suitable protective
gloves.
• Batteries/rechargeable batteries must not be short-circuited, opened or thrown into a
fi
re. There is a risk of
explosion!
• Do not recharge normal, non-rechargeable batteries; there is a risk of explosion!
b) Inserting the Battery, Replacing the Battery
• The battery (1x CR2025) is normally already inserted at the time of delivery. Pull out the transparent plastic
protective strips; the IR remote control is now ready for operation.
• To replace the batteries, press the retaining clip of the battery holder together and pull the battery holder
out of the IR remote control.
Make sure that the polarity is correct when inserting the new batteries (pay attention to plus + and minus -).
The positive terminal of the battery points towards the bottom side of the IR remote control.
c) Operation
Align the small transparent transmission diode at the front border of the IR remote control directly with the
round reception diode in the DVB-T stick. IR reception may not always be possible, depending on the posi-
tion of the DVB-T stick on your computer (e.g., on the rear side of the computer). If necessary, use a USB
extension cable to ensure that the DVB-T stick can be placed appropriately.
Connection and software installation
• Switch your computer on and wait until the operating system is completely booted (at least Windows XP
recommended).
• Connect the DVB-T stick either with the telescopic antenna provided or alternatively with the magnet
antenna (in the latter case, the antenna adapter provided must be inserted between the DVB-T stick and
antenna).
• Connect the DVB-T stick to a USB port on your computer, which can deliver a current of 500 mA.
If you use the telescopic antenna, pull it out to its full length and position it vertically in the upward direction.
If you use the stand antenna, select a suitable location e.g., in the vicinity of a window. Thanks to the
magnetic foot, the stand antenna can also be mounted on e.g., suitable metallic surfaces.
• Windows detects new hardware after the DVB-T stick is connected.
Stop the search for the driver and insert the CD provided into an appropriate drive on your computer.
If your computer does not have a CD-/DVD drive, copy all the CD data onto a USB stick on
another computer, and use it for installation.
If the installation program does not start automatically, open the CD main directory and start the “TV_Stick.
exe” program.
To install the driver, click on “Install driver” and follow all the software instructions.
The software must be installed after the driver has been installed. Click on “Install software”. Then select
the desired language for the setup
fi
rst.
You must then input a username (random) and the licence key (Serial No.). The latter is printed on the CD
cover.
With newer versions of the CD, this procedure might be different.
• After completing driver and software installation, start the software. A new icon was stored on the desktop
for this (on the date these operating instructions were created: “Total Media 3.5”).
• First, carry out a station search run. To do this, click on “Settings” and “TV”. The wizard for setting up the
TV signal then starts automatically. Follow all of the instructions.
If no channel is found, ensure that the telescopic antenna is stretched fully and that it is vertical.
If necessary, use the stand antenna and place it near a window.
The antenna adapter provided can be connected not just to the stand antenna but also to other
DVB-T antennae, e.g. to an active outdoor antenna.
Then restart the channel search run.
• Detailed operating instructions on the “Total Media” software are available in the “Users Guide” directory. It
is in “PDF“ format. To view the
fi
le, you need e.g. “Acrobat Reader”, which you can download free of charge
at www.adobe.com
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the household
waste!
Please dispose of the product, when it is no longer of use, according to the current statutory
requirements.
Remove any battery/rechargeable batteries inserted and dispose of them separately from the
product.
b) Batteries and Rechargeable Batteries
As end user, you are legally obliged (Battery Regulation) to return used batteries and rechargeable batteries.
Do not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these symbols to indicate that
disposal in the domestic waste is forbidden. The symbols for the relevant heavy metals are:
Cd=Cadmium, Hg=Mercury, Pb=Lead (marked on batteries/rechargeable batteries, e.g. under
the rubbish bin symbol shown to the left).
You can dispose of your used batteries/rechargeable batteries free of charge at your community’s collection
point or any place where batteries/rechargeable batteries are sold!
You therefore ful
fi
l your statutory obligations and contribute to the protection of the environment.
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product con-
forms to the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com
OPERATING INSTRUCTIONS
DVB-T USB mini-stick with antenna
Item no.
1404311
Version 10/12
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro
fi
lming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in echnology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.