![background image](http://html1.mh-extra.com/html/conrad/1193915/1193915_operating-instructions-manual_2654464030.webp)
30
13. Troubleshooting
In purchasing the active PA system, you have acquired a product designed to the state of the art and operationally
reliable.
Nevertheless, problems or errors may occur. Therefore, we would like to describe how to eliminate possible errors
here:
Always observe the safety information!
No function, the POWER (3) display does not light up
• Is the system switched on?
• Is the mains plug connected to the mains socket?
• Is the system‘s fuse defective?
• Check the mains socket. Is it properly supplied with current?
The POWER (3) display lights up, but there is no sound
• Is the volume control on the mixer set to minimum?
• Is the mixer properly connected to the input?
• Is a muting function active at the mixer?
• Is the MAIN LEVEL (6) controller set to minimum?
Only one satellite speaker is working
• Is the respective connection line of the mixer OK?
• Is the speaker properly connected to OUTPUT SAT RIGHT or LEFT (10)?
• Is the balance or panorama controller at the mixer set incorrectly?
• Is the connection line from the audio source to the mixer connected correctly?
A drone is audible
• Are the signal cables from the mixer to the active PA system OK?
• Are the signal cables from the audio source to the mixer okay?
Repairs other than those described above must only be carried out by an authorised specialist.