SERVICE
If service becomes necessary, the amplifier may be either returned to your dealer or
sent to conrad-johnson for service. In either case, a written description of the
difficulties encountered must be provided. If the problem is intermittent, please
indicate.
To ship the amplifier, MV75A: remove the entire rack panel and protective cover
assembly by removing the switch nut and three machine screws from each side of the
chassis. Next remove,. and separately box, the tubes. The amplifier chassis and the
set of tubes must be packed in the original factory carton and packing materials. The
amplifier should be shipped without its rackplate and cover.
To ship the amplifier, MV45A: remove the protective cover by removing two screws
on each side of the chassis. Next remove and separately box the tubes in their
individual boxes. Pack the boxed tubes into the tube carton. Reinstall the cover over
the tube carton and box the amp in its original factory carton and packing materials.
Shipping cartons and packing materials are available from conrad-johnson at a
nominal charge. Ship by United Parcel Service (UPS) to:
conrad-johnson design, inc.
2733 Merrilee Drive
Fairfax, Virginia 22031
(703) 698-8581
