13
•
Briefly press any button on the remote control.
The alarm base station acknowledges reception
by emitting a short signal tone and the LCD on
the alarm base station switches to the display for
entering the name of the remote control.
•
Use the buttons on the alarm base station to enter
the name of the remote control, such as the name
of the person who is using the remote control.
f
To enter the letters use the 2-9 buttons, each of which represents
several letters (click through as with a mobile phone by repeatedly and
quickly pressing the same button).
f
Numbers and umlauts can also be found on the buttons (for instance,
‘Ä’).
f
Use the ‘
0
’ button to enter a space character.
f
Special characters can be entered using the ‘
y
’ and ‘
z
’ buttons.
f
You can use the ‘
Menü a/A
’ button to switch between lower and upper
case.
f
The cursor automatically jumps to the next position approx. one second
after the last button was pressed.
f
You can use the ‘
w
C
’ button to delete a character you entered by
mistake.
•
Once you have entered the name you require,
press the ‘
OK
’ button.
•
If you wish to register another remote control,
proceed as described above.
•
You can exit the registration mode of the alarm
base station by pressing the ‘
w
C
’ button thrice.
The alarm base station then goes back to the
normal display mode (main menu).
rem.con. 1
_
rem.con 1
Peter_
rem.con. 2
clear
disarm
16:54 14.12
Summary of Contents for FAZ3000-FB-2
Page 23: ...23...
