4
2. Prescribed use
The radio PC interface ‘FAZ 3000-PC-2’ is only suitable for use with the wireless
alarm system ‘FAZ 3000’.
The PC interface is used to configure and remote control the ‘FAZ 3000-Z’ alarm
base station. The individual components can then be simply and easily
configured or set using the accompanying software (only for Windows®). The
sensor names and telephone numbers for the ‘FAZ 3000-AW-3’ alarm dialler
can be changed without directly accessing the alarm base station.
The PC interface can also send an e-mail, from a computer with an internet
connection, detailing the alarm cause in the case of an alarm (internal/external/
smoke/break in/sabotage). Taking advantage of the facility which allows an
e-mail to be sent as SMS to a mobile phone, you can also receive SMS
notification of alarms on your mobile.
The PC interface settings which should be entered in the alarm base station
are described in detail in the alarm base station’s user manual.
The PC interface is equipped with an internal sabotage contact, which
automatically triggers a sabotage alarm via the alarm base station if the casing
is opened without authorisation.
Power can be supplied to the ‘FAZ 3000-PC-2’ either entirely from batteries
or using an external power supply in addition to the batteries.
The product is only suitable for use in dry and closed indoor rooms. Make sure
it does not get damp or wet.
Any use other than the one described above may damage the product and can
also increase the risk of short-circuit, fire, electric shock, etc.
No part of the product may be modified or adapted. The device may only be
operated when its casing is fully closed.
All the safety instructions and installation notes in this
manual must be observed without fail.