30
Button
Function
Making settings using the monitor buttons:
Access the menu for the above settings via the MENU button (12) on the
monitor. Use the buttons "UP" (11) or "DOWN" (13) to set the desired value.
CH1
–
CH4
Press the button "CH1" to "CH4" (18) to select the desired
camera channel directly.
SCAN
If you press "SCAN" (22), the system switches automatically every 5
seconds between the channels CH1 to CH4 in sequence.
Please note that it is not possible to select the setup menu during the SCAN
process with the button "MENU" (21) on the remote control or the button
"MENU" (12) on the monitor. You first have to terminate the SCAN process
by pressing the button "SCAN" (22) again.
The SCAN process is active as long as the channel display (green) blinks
on the top right edge of the screen. The SCAN process is terminated as
soon as the channel indicator no longer blinks or is no longer displayed.
AV/
Press the button "AV/RECEIVER" (23) to switch between AV mode
RECEIVER
or RECEIVER mode.
AV mode
In AV mode, the images of the connected playback appliance are displayed
on the monitor's "display" (7).
RECEIVER mode
In RECEIVER mode, the images of the camera are played back on the
"display" of the monitor (7).
☞
Please note: when pressing the button "MENU" (12) on the
monitor for two seconds, you can also alternate between AV
mode and receiver mode.