52
X
X
X
X
X
Setting temperature limits for temperature alarm
• Press and hold the “
ALERT
” (
E
) button for 3 seconds until a tone signal can be heard.
• With the ”
T
SINCE
” (
B
) and/or ”
S
HISTORY
” (
C
) button it can be toggled between indoor
and outdoor temperature display.
• Briefly press the ”
ALERT
” (
E
) button as confirmation.
• The top part of the icon ” ” flashes (”
...”).
With the ”
T
SINCE
” (
B
) and/or ”
S
HISTORY
” (
C
) button you set the
top
temperature limit
(e.g. 25°C)
• Briefly press the ”
ALERT
” (
E
) button as confirmation.
• The bottom part of the icon ” ” flashes (”
...”).
With the ”
T
SINCE
” (
B
) and/or ”
S
HISTORY
” (
C
) button you set the
lower
temperature limit
(e.g. 18°C)
• Briefly press the ”
ALERT
” (
E
) button as confirmation. Doing this, the setting is completed.
X
X
X
X
X
What happens when the temperature limits are exceeded are fall below the set level?
The base station will emit a tone signal. This is repeated every minute as long as the
temperature limit is exceeded or falls below the set level.
The icon ” ” will furthermore flash on the display and the displayed temperature.
Briefly pressing the ”
SEARCH IN/OUT TEMP
” (
D
) button stops the tone signal every minute,
however the icon ” ” and the displayed temperature will continue to flash.
Summary of Contents for 646240
Page 114: ...116...