7
User Guide
-
COSHH Store
•
Never unevenly load this equipment.
•
The weight of the equipment, together with its attachments, must be added to
the weight of the load when calculating the total load that will be imposed on the
lifting apparatus / operating machine.
•
This equipment must be used in conjunction with the load ratings of the lifting
apparatus / operating machine. (Refer to the manufacturers’ load ratings and
original working instructions).
•
Make sure you know how to use this equipment and understand all aspects of its
operation in case of emergency.
•
This equipment weighs more than 25kg. Do not lift or manhandle without
machine assistance.
•
Do not operate this equipment near overhead power lines.
•
Take care in confined spaces, near ceilings or similar hazards. This equipment was
designed for vertical lifting. Do not drag, or swing.
•
Before operating this equipment, check that you have enough space for you to
work safely and make sure that the working area is clear of hazards, obstructions
and personnel.
•
Before lowering equipment make sure that the landing zone is clear and capable
of accepting the size and weight of the load.
•
Crush Risk. Keep hands and feet clear of the equipment at all times to avoid injury.
•
Do not exceed the maximum Working Load Limit (WLL) shown on the serial plate.
Ensure that the WLL on the individual lift points is not exceeded.
•
Manoeuvre raised equipment carefully. Travel and turn slowly to avoid
unit becoming unstable.
Safety Instructions
USAGE & TRANSPORTATION
•
All personnel must wear relevant personal protective equipment.
•
Do not
wear loose clothing or jewellery and tie back long hair to avoid becoming
tangled or trapped in this equipment. You must make
everyone
in the work area
aware of what you are doing.
•
All personnel involved in the lifting operation must be competent to do so and
must have been briefed in conjunction with this User Guide available from
Conquip Engineering Group, the manufacturer.
EQUIPMENT MAINTENANCE & CLEANING
•
It is mandatory that the equipment is thoroughly examined regularly, by a
qualified engineer, to ensure compliance with relevant regulation/s.
(Conquip recommend to carry out thorough examination every six months).
•
This product may incorporate various loose and detachable items of lifting
gear. Refer to the separate requirements for the safe use of those items.
•
When not being used, store the unit in a clean, upright condition and in a safe
place where it will be protected from thieves and unauthorised users.
•
This equipment must be inspected by a competent person before each use and
then regularly, as determined by your risk assessment or working practice. If
you have any concerns about condition or suitability
do not use.
Safety Instructions
PERSONNEL
