INSTRUCTIONS: 5100557 - CONOCO APEX PUMP VALANCE
REV 10/1/2019
Sheet 4 of 10
Step 3:
Line up the holes on one side of an end panel (Part H) with the holes in one side panel. Using the 1/4”
x 1” bolts provided, fasten them together as shown in Figure A. Pull the other side of the end panel toward the
second side panel as shown in Figure B. Align the holes in both panels and fasten with the bolts. Repeat this
process for the other end panel, and make sure the panels are flush together and that there is no light showing
through seams when looking at them directly.
Assembly Instructions
FIGURE C
Result after fastening end panel to side pan-
els.
FIGURE B
Bending end panel into a
curve
FIGURE A
Fastening end panel to a side
panel