BATTERY INSTALLATION--- REMOTE CONTROL
Battery Installation
Remote Control Effective Range
not operate properly.
shines on the remote sensor
Battery Precaution
1.Slide and lift the battery door (Figure 1).
2.Install 2 (two) AAA size batteries into the battery compartment as indicated
3.Replace the battery door (Figure 3).
+
-
+
-
Battery
11
by the polarity markings
(Figure 2).
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the coorrect polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together(e.g. Alkaline and Carbon-zinc) or old batteries
with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer's instructions).
6. The batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
7. Clean the battery contacts and also those of the device prior to battery installation.
A
B
C
PAIR
PAIR
C
B
A
ARC
/
X
TUNE+
TUNE-
EQ
When there is an obstacle between
the unit and the remote control, the
remote control may
When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
of the unit, the operation of remote
control may be unstable.
16 Feet (5M)
