10
CTKPFD10_IG_v2
CLIMATE/CONVENIENCE CONTROLS
The touchscreen interface replaces the factory climate, convenience and personalisation controls built into the factory Ford
stereo/dash panel. This solution provides improved ergonomics whilst adding touchscreen capabilities unique to this sys-
tem. Read the following sections to familiarise yourself with the operating controls and settings.
LEFT TOUCHSCREEN BUTTON LAYOUT
1. Change on-screen button configuration to show
controls for heated and cooled seats (if vehicle is
equipped). Level for both driver and passenger side
seats can be adjusted up or down independently.
2. Access menu. See ‘Menu Structure’ for more
information.
3. Quick press four times and hold to enable
Installer Menu. The Installer Menu can be found un-
der ‘Vehicle Settings’ by pressing the MENU
button (4) on the screen.
4. Press the POWER button to toggle the climate
controls on or off.
5. Press to toggle Automatic Air Conditioning on or
off (indicated by the orange icon).
6. Press to turn on Air Recirculation feature.
When on, air will be recirculated inside the vehicle
to quickly cool the interior and prevent outside air
or odors from entering.
Note: Operating this function when the A/C is off in-
creases humidity and may cause the windows to fog.
This feature is not available when Defrost or Defog
modes are active.
HH:MM
TEMP
MENU
CTRL
MyTemp
23.0
22.0
A
MAX
DUAL
AUTO
AUTO
A
7. Activates maximum cooling with temperature
automatically adjusted to the lowest setting and fan
speed increased to the highest setting. Press the
button again to return to the previously selected fan
speed and temperature setting.
8. A preset/favourite temperature for the driver zone
can be stored using the MyTemp function. Once a
desired temperature for the driver has been set, long
press/hold MyTemp button until a beep is heard. A
short press of the MyTemp button will now instantly
restore the preset driver temperature.
9. Press to direct air at the front windscreen to help
clear fog or moisture. A light will illuminate in the
button to indicate the active/inactive status of the
Defrost mode.
Note: For best results, clear the windows of snow or ice
before activating Defrost mode. Do not attempt to
operate the vehicle until windows are clear.
10. Press to defog the rear window. A light will illumi-
nate in the button to indicate the active/inactive
status of the Defog mode. The Defog mode will also
be turned off when the vehicle ignition is turned off.
3
2
1
8
10
9
7
6
5
4