Connects2 CT51-MC03, Quick Start Manual

Page: 3 / 4

www.connects2.com
3
FITTING GUIDE
1. Remove and disconnect the original head unit.
2. Connect the 14 way molex connector to the interface
3. Connect the male power/speaker ISO harness to the female power/speaker ISO
harness from the aftermarket head unit. For aftermarket head units without an ISO
connector, please refer to “Wiring Colour Codes” on Pg. 2.
4. Connect the red/white RCA connectors from the interface to the back of the
aftermarket stereo
5. Connect the female vehicle specific connectors on the harness to the male vehicle
connector from the vehicle.
6. Remove the car display connector from the vehicle and plug into the interface
(please remove the dust cover from the interface before making the connection).
7. Connect the display connector from the loom to the vehicle (the port previously
occupied by the car display connector, removed in Step 7.)
Test head unit for correct operation